Hey all,
I just cracked my oil pan and was wondering how much I should expect to pay
for parts and labor for a 1997 Dodge Oil Pan & Gasket replacement.
Parts & Labor.

I have a lot of miles on my 44RE Transmission IN A 97 DAKOTA 4x4 with 5.2
eng. & wondered if a later
model like the 45RFE or a 46RE would work. Or is it too much trouble? The
45RFE is out of a 2002 with

How about a dicussion about converting a 2500 QC, 360, NV4500
manual over to a 6 speed NV5600.  I've heard the driveshaft lengths
are different, and the flywheel.  I'm considering going this route since
I'll be adding the ProCharger and a few other items in the not too

Trying to remember if its feasible to switch out stick for an automatic
or automatic to stick. What are my options on 2004 stick ? I don't like
the stick that comes with the truck . Harder to resell a stick ?

I want to put an alarm on my '99 Ram. I would like it to have a remote start
function that will work with the diesel "wait to start" circuit. Any
recommendations? Any brands to avoid?

Our 99 Durango is supposed to have anti lock brakes but I'm not sure if
their working right.
Braking in a panic situation still leads to a rear wheel lock up even on
dry pavement.  I have already bled the brakes and add fresh fluid to the

Makes knocking noise when put in gear....sounds like in
transmission.....could it be anything other that drive-shafts
joints....if not how do you check them....

Anyone know a URL which lists the interchangeably between brands of
oil filters ?  
Just replenished my supply of oil for the garage and noticed I have
6-7 oil filters on the shelf that I just have no clue for what

VERY GOOD MECHANICAL AND PHYSICAL CONDITION, 318 V8, 145k miles, still
runs strong.  MUST MUST MUST SELL!!!!!!!  PA truck now in Northeast
Ohio. Email for more info. MUST SELL!!!!!!   $800

How happy I am since I traded my 2003 2500HD Hemi for a 2005 3500HD
Dually....
...
..

How do I find the drain plug is there one?

I noticed a small black box inside engine compartment labeled "Body Gard"
and "Computerized Corrosion Control module" or smth to that effect. It was
unplugged, so I tried plugging it in and red light on the box came up...
Is this supposed to be factory-installed option (didn't ...

I need to change u-joints on the front axles of my 94 ram 1500.  Does
anyone know what size the hub nut is?  Can the hub and bearing be
removed with the axle, eliminating the problem of removing the hub nut?
If not, how do you break the nut loose?

steven,
if you got the skills to step up with the big dogs (commercial rack
systems), consider a trip to montana soon.  i got more work than i can do,
and cant seem to find refrigeration help.

I need a bit of advice from the gurus...   Delaware changed their
inspection requirements to include being able to hook up to the OBD II
for emissions information and I just failed my inspection because it got
no signal.  I took it over to a friend's house and used HIS cable &