im looking for a clear image of the "cummins turbo diesel" badge.  i can
find camera pictures (or hell, i could take all the pictures i want) but im
looking for more of a direct scanned type image.  any help would be
appreciated.

Shifting up seems to be getting a little spongy of late.Any special trick to
adjusting the bands? It looks pretty straight forward in the book. Any
problems anyone else run into?       Thanks in advance.
Oz

by Blair Goldstein
www.newsadvance.com
June 24, 2005
It's a simple recipe: Mix 10 gallons of vegetable oil with 10 gallons of

I have this '01 Dakota with ....would someone

and what is a pcm? I learned chemistry in school and not dodge truck
2001 4.7 53k miles

Partway through our long roadtrip through the western wilds of Scotland,
my truck (2001 Dak) started making a new noise and feel.  There's a
distinct 'clunk' kind of noise, which can be felt in the steering wheel.
 First thing I checked was the power steering fluid, which was a ...

I just put a new electric fuel pump on my 2.0L (Mikuni Carb) because the
local parts stores did not have the spacer that goes between the
mechanical pump and the head. Now, I have fuel pressure and flow through
the carb and back to the tank, but the engine will not start. I can pour

the airbag light came on for an unknown reason in our truck and was
wondering if any of you mechanics could help out with an answer on why and
also how to fix it

I am looking at an 85 RamCharger for $3,000. the Truck looks good but the
owner states that he took a bearing of the front hub because of a rumbling
sound.
Then stated that he had to take it apart because the 4 wheel drive stayed

I'll call this a cautionary tale.
The jack for my 2002 Ram 1500 just broke while in use.   It's second use.
Get yourself a decent bottle jack and stash it in the cab somewhere.  I will
not replace this jack with another identical Dodge jack, it's a poor design,

I have this '01 Dakota with an error message  P 0601....would someone
please
tell me what this error is....and possible remedies......Thx... Thump

I have a 1977 Dodge Ram 1500 with factory tow package.  Round trailer
plug at the hitch.  The heavy duty signal relay and electric brake
controller plug and wires are in the glove box.  The owners manual
says the brake controller wiring harness plug is taped up under the

The check engine light come on. I went to auto zone and they read the
code. They said I need to replace the speed sensor. Just where is this
sensor? I've heard it's located on the trans, on the rear differential.
My trans has also started acting up, shift point between first and

I have a 1996 dodge diesel 2500 2wd and I am in the process of changing the
ball joints.
The truck is jacked up on the frame in my garage and I have the nuts off the
upper and lower ball joints. How do I get the "spindle" or axle or what ever

Well, we got the ram back... the shudder and noise turned out to be rear end,
again...
Last year, when we had the horrible howling noise, the dealer replace all the
seals, bearings, etc., but not clutches or gears..

the self diagnostic code was 1 2 5 5,the fuel pump souds like its
working,any other suggestions