frustrated with not being able to sell my '01 dodge and needing service
vehicles for the company im launching i took the plunge yesterday and bought
an additional new cummins.
http://utilityoffroad.com/forum/topic.asp?TOPIC_ID=4526

.

             would you like to make between $5000-$10000 a month
             working from home.
             If you are interested,then you can go to this web
             site http://automaticbuilder.com/13602 to get more

Time to replace the shocks on my 2002 1500 4x4 4.7L Ram Quadcab std  bed.
Regularly drive highway miles empty and also pulling up to 4000 lbs trailers.
I would appreciate any thoughts on best choice for the $$
Thanks in advance

change fuel pump found a green ball in tank the size of a ball like you
would use to play jacks....what is it for ...

I am almost there!  I have a 98 non-sport that I am trying to modify to
a 99 Sport front end.  I have replaced the bumper and am trying to
replace the grille.  I have a sport grille, but in attempting to install
it, I found that I will need a new frame.

I have a new Power Wagon and was wondering if anyone out there knew what the
tire pressure is supposed to be.
Normally tires just say the max pressure but this one does not come right
out and say it. There are 2 lines that say something like "max cold 65 psi"

"TBone" <t-bonenospam@nc.rr.com> wrote in message
news:VA2ue.63$BN3.33093@twister.southeast.rr.com...

I get the following trouble code when driving, it returns when I clear
it out
P0132 - O2 Sensor circuit, high voltage (cylinder bank no. 1, sensor no. 1)
I also get the error code 21

truck wont start...sounds like wants to turn over ..how do you drain gas
think i have water in it..?help please

Would the MEDIATOR please do his job and stop this SEX SPAM CRAP !!!

id like a set of mud flaps like these for my big horn dually:
http://powerstore.cummins.com/products/truck-mud-flaps-detail.jpg
theyre way to big and im not sure if they could be cut down small enough to
fit without cutting into the logo.  ive seen these:

The problem started with the four wheel drive not disengaging. As I wa
driving down the road it was making a very loud grinding noise. Thi
noise would stop when I put it back into four wheel drive but the
would resume when I put the shifter into two wheel drive or would g

As much as I've enjoyed my 97 Ram, and use now as a work truck on a daily
basis, sometimes working on it can  be a bit of a pain.
Changed the waterpump yesterday.
First lesson I learned was that the fan shroud does not come off first.  You