i have a clicking noise took starter out and was tested and it is good put
it in truck just clicks any idears please help

On a 2000 dodge durango, how hard is it to take off the interior door panel
and change out this motor? is it a do- it your-self proposition?, dealer
wants over $500. Please advise

My 1998 12 valve diesel has 191,000 miles on it. I developed a vibration in
the ride that persists from around 40 to 75 MPH. I needed new tires so I
purchased a set of LT/MS Michelins. I also had the ball joints replaced and
the shocks are less than 6 months old. The vibration is ...

{I posted this earlier with a picture attached and I didn't realize that it
was 600k, sorry 'bout that, dial-up folks}
I took the head off my 97 Ram 4x4 360 to look at the #8 cylinder since the
plug was discolored and it has a miss.  here is a picture of the valves.

Anyone here have info on contacting Dodge for info and pricing on police
package vehicles? Our local Sheriff and police departments are looking to
buy new vehicles, and would like to at least compare Dodge to the quotes
they already have.

Nieve question.  I appears I've got 4 rads on my 97 Dodge CTD.  Other than
the "normal" rad. what are the rest for?  Presumably one is a transmission
cooler.

As usual, Max was WRONG!!!! The Duramax diesel is STILL going strong
after several years of PROVEN reliability.
2006 Duramax 6600 Turbodiesel to Deliver Class-leading Torque in a More
Powerful and Refined Package

Back in May, my Firestone dealer replaced the left lower ball joint. Have
been noticing some squeaking that appears to be coming from the left front.
When I looked it over, it appears that the boot on that balljoint is loose,
there's a gap between the boot and balljoint.  Question ...

I replaced the front break on my 2002 Dodge Grant Caravan
with a new pair of pads with the rotors tuned last weekend.
I checked and everything seemed to be done properly. But I
noticed that when I applied the break, especially when going

I'm looking to sell my 1999 Ram quadcab, Laramie SLT, 318 4X4, 102,000
miles, cap and running boards.
So I start looking at Kelly Blue book, NADA, and Edmunds to get a
ballpark on its value.

Just went to leave work and get in my truck, head to the gym then home.
I get in my truck, it is dead...no clicking hardly any lights at all.
Battery dead!  I jump it, leave it run for a while, then it dies.
Before it died, the light on the AC button was blinking and my radar

I have a 2001 durango and the ignition cylinder is jammed and no amount of
wheel jiggling and key wiggling will get it to turn. so does anybody have
any info on causes and solutions. I'm pretty sure I'm gonna have to change
it at this point, so if you know of any special tools or ...

alright id like to know a few thoughts on witch EGT gauge to get, mounting
solutions, and where/how to put the sensor on a 05 cummins.
tia
chris

I guess everybody has been watching the coverage. I figure it is time to put
some serious troops in with a no bs set of orders.
Roy

May be seen in: Truck World News -  "www.infotruck.blogspot.com"
"WORKING beyond the standard eight-hour day may raise the risk of
job-related injuries, regardless of a person's occupation, a new study
suggests...   Among nearly 10,800 US adults followed for 13 years,