| Thread | Last Post | Replies |
|
| Front end bounce with new shocks | 14 Sep 2005 15:17 GMT | 2 |
I replaced my original shocks last year on my 97 1500 4x4 with some cheapo Pro-comp ES9000's. My front end started to bounce like crazy when I hit a bump at speeds over about 40mph, to the point I'd have to stop the truck to get it back under control. I replaced the trackbar
|
| 1999 Dodge Ram dashboard | 14 Sep 2005 00:44 GMT | 17 |
Is there anyone out there that has had problems with the plastic top of the dashboard cracking in numerous places? I have a black truck and gray interior, and the plastic top of the dashboard has many cracks in it, mostly running front to back. The truck has never been
|
| Roy needs his butt kicked... | 13 Sep 2005 22:54 GMT | 6 |
Yep, that's right. Since Roy posted about the gas prices going up, prices in this area went from $2.54 on Monday to $2.69 on Tuesday to $3.10 today. I figure we all should head east (if we have the bucks for the gas) hunt down ole Roy and stick his head in one of his beagle holes ...
|
| 2001 Dodge Dakota Blower Motor | 13 Sep 2005 19:30 GMT | 1 |
Recently the blower motor for my A/C went out. When I turn the A/C switch on, I hear it kick on but nothing is blowing from the vents. I'm assuming this means that my heater and defroster will not work either. I plan to check the blower motor and blower motor resistor but am not ...
|
| Towing with Ram 1500- has anyone done it? | 13 Sep 2005 16:22 GMT | 9 |
I have a 2003 Ram 1500 4x4 QC, with the 4.7 liter engine. It has the tow package with the 3.92:1 limited-slip differential. I did not buy this truck with the intention of towing anything but now I would like to.
|
| Hey Tom L. IAC didn't fix it (Code 43) | 12 Sep 2005 07:29 GMT | 20 |
Any idea what to try next? Cleaning, then replacing the IAC didn't phase the problem, P0307 literally within 2-3 miles of clearing it but -ALWAYS- occurring at low RPM. If I clear the code and then watch my RPMs close, kick it into neutral
|
| Are the lifters adjustable on the 5.9 liter engine? | 12 Sep 2005 05:22 GMT | 3 |
Mine are getting a little noisy during startup. 70k miles. I use Mobil 1 syn. oil, and mobile 1 filters.
|
| How to find a good body shop | 11 Sep 2005 05:23 GMT | 1 |
I just picked up my five month old 2005 Dodge Ram diesel from the body shop. The truck had a four inch long vertical dent about as wide and deep as a finger that crossed the contour line of the left rear fender where our travel trailer jacknifed against it as I was attempting to
|
| 1986 B150 Van axle troubles?? | 11 Sep 2005 04:29 GMT | 3 |
Hello everyone - I have a 1986 Dodge van B150 with a V8 and auto trans. Here is what I have ... I started with a grinding noise and feeling in the rear axle ... this only happens when I turn left from a dead stop ...so from a stop turning left I get this only and just a little now
|
| 04 radio question | 10 Sep 2005 03:30 GMT | 2 |
Anyone have any luck finding the small 10 pin connector that plugs into the back of the radio/CD/tape or radio/CD unit? Could that be an input for external audio like an I-Pod? Anyone have a pin out? Al
|
| 1999 Dodge Durango - spark knock problem | 10 Sep 2005 02:56 GMT | 7 |
I have a spark knock that is consistantly making noise when accelerating. I've had the engine tuned up, timing checked, fuel rails cleaned, and the spark knock went away for about 3,000 miles. It is back. After talking with a couple of other owners of 1999 Dodge Durangos it seems ...
|
| T-Bone for Pres. | 08 Sep 2005 20:26 GMT | 9 |
We gotta vote him in. He "knows" them swamp boats are everywhere down there so with that kind of smarts he'd be the best president we ever had. The world would be saved...... Denny
|
| 89 ramcharger | 08 Sep 2005 19:42 GMT | 1 |
5.1L auto trans 2 wheel drive/od when i put it in any gear it is making loud squeeling noise but only when trans is ingaged. does anyone know what this may be. trans is 4 years old with 25,000miles on it
|
| Where to Get Dakota TSB/Recall Information? | 08 Sep 2005 10:43 GMT | 2 |
I have a 2002 Dakota, and would like to get copies of the service information associated with recalls C35 (wiring harness) and D47 (upper ball joints). The local dealer, which I shall not name, keeps bugging me to schedule service on these recalls, but there
|
| Gulf Coast part 2 | 08 Sep 2005 00:08 GMT | 75 |
Let's try to keep the politics out of this question. Let's make it yes or no!! Do you feel the response was late??? YES OR NO!!
|