| Thread | Last Post | Replies |
|
| high beam indicator flash 05 2500 | 16 Oct 2005 03:16 GMT | 3 |
havent had the truck but a week and tonight driving home from the lake with the boat in tow. i noticed something a little odd. i thought. when running with the low beams on i would intermittently see the high beam indicator flicker. nothing major the lights them selves didnt seem to ...
|
| tranny service advice | 16 Oct 2005 00:15 GMT | 98 |
Hello... Couple questions for the transmission guru's around here. First off, My truck is a 2000 Ram CTD QuadCab Shortbed 3.55 gears all stock 61,000 miles. I plan on doing the 60k service which includes transmission fluid ,filter and adjust bands.
|
| Dodge part numbers | 15 Oct 2005 21:40 GMT | 2 |
Does anyone know a good site to get part numbers? and is there a good site to get parts from online? I need bushing part # for my 97 3500 diesel 4x4 3500 and my 97 dakota, replacement seatbelt, hood latch cable, etc. thanks in advance.
|
| 2005 2500 4x4 Quad-cab jack | 15 Oct 2005 07:41 GMT | 38 |
Can anyone tell me what the purpose of this tiny, insignificant jack is supposed to be?? I finally took it out from underneath the passenger-side seat and couldn't believe what I saw! I almost laughed my head off at Dodge for even thinking of placing such a useless piece of ...
|
| CC Cleaner Question: Where is the tube I use to get it into the engine? | 15 Oct 2005 02:28 GMT | 3 |
I read where a poster said to use the air intake tube off the throttle body but I dont know where that is. 99 360.
|
| 04 Ram 1500 brake light leaking from satellite antenna | 14 Oct 2005 19:58 GMT | 2 |
Rain is leaking into my cab, it's been raining steady for a couple of days, and I think ( it is ) it's my satellite radio antenna. Any one else have that problem and any fixes. I took it apart today to see but it was raining again so I couldn't do much. Thanks for any help.
|
| Rear bumpers | 14 Oct 2005 18:55 GMT | 1 |
Has anybody had any experience with Buckstop Truckware? Looking for a rear bumper and what they have looks pretty good, but look aren't everything. www.buckstop.biz Roy
|
| Remote start | 14 Oct 2005 06:22 GMT | 2 |
I am thinking about putting a remote starter in my 2005 dakota, problem is the one I got is aftermarket (from another vehicle...I took it off and am reinstalling on this one). I can't decide if, to save the warranty on the electrical system from being voided, I should buy a new
|
| Dodge CTD vs Dodge 360 gas | 13 Oct 2005 12:06 GMT | 44 |
I have a 26-5c Arctic Fox 2006 5th Wheel on order, due end of October. I visited the dealer today and found he has a 2005 model sitting in his inventory. He told me that the previous owner had a 360 Dodge Gas truck and had problems pulling this unit. Frankly this scared the ...
|
| Distributor replacement with a vacuum advance | 13 Oct 2005 11:51 GMT | 3 |
Can a person replace a hall effect setup on an 1988 3.9 d150 with a distributor with a vacuum advance. That way I could put a regular carb on it and do away with the smec?
|
| 94 Dakota FM/AM Casette Radio | 13 Oct 2005 02:24 GMT | 9 |
Out of the clear, my radio quit working in my 94 Dakota. It just went completly dead, no noise, nothing. Fuse checks okay, so must be an internal problem. Has anyone else had this same problem, and what did you do about it?
|
| 2005 dakota recall | 13 Oct 2005 00:13 GMT | 1 |
For all who don't yet know there is a recall on the 2005 Dodge Dakota. Recall document (copied from http://www-odi.nhtsa.dot.gov/cars/problems/recalls/recallsearch.cfm) Make : DODGE Model : DAKOTA Year : 2005
|
| CTD Fuel mileage | 12 Oct 2005 23:12 GMT | 5 |
Anyone have real numbers on fuel mileage on a late model CTD? I can get 19+ around town, but on the highway it goes down to around 13 if I drive over 75 MPH. Al
|
| '93 Dakota distributor gear replacement | 12 Oct 2005 22:53 GMT | 4 |
After trying unsuccessfully on my own to diagnose a stalling problem, I took the pickup into Procare. They found that the distributor gear is badly worn so that the timing is affected leading to the stall and often a backfire in the exhaust. Fuel pressure, EGR valve, and ...
|
| Reupholstering in vinyl | 12 Oct 2005 14:18 GMT | 3 |
Anyone done any reupholstering in there trucks using vinyl? I am trying to find the best way to seam (not being able to stitch it) and have them as invisible as can be.
|