I found this article at
http://autos.groups.yahoo.com/group/collectorcarcentral/
and I thought it might be helpful with all the jerks trying to sell flood damaged cars.
Thanks

 I have a 99 dodge ram 1500 quad cab, 318 auto, and ac ,with a leaky
heater core. I was wondering if anyone can tel me what all is involved
in replacing the heater core.
thanks in advance

Hello, I have a 4 cylinder Dakota 2000 year model.  I am looking for a
replacement AC compressor and all I see for sale on ebay and a few
other places is the one for the V6 and V8.  But these are also the
Sanden I forget the model number NDH71 or something close to that.

I have a 96 2500 Cummins diesel with ABS brakes.  Lately when I start it up
the brake pedal will be very hard and right at the top.  After a minute or
so it fades down to where it is supposed to be and the brakes seem to work
fine.  Any idea what the problem is.  could this ...

I have a 2002 Dodge Dakota Quad Cab and my A/C & Heater fan motor
does not work.
I think it is the resistor, but who can tell with all the electronics on a
vehicle any more.

i have this product that just blows my mind.. i am selling it now.. trying to find out how much tranny fluid is in a slt hemi transmission anyone know?... also if you are interested in saving money on fuel and getting alot more performance power and cutting out alot of that ...

Since the front axles are always turning, is there any reason you
couldn't disconnect the front drive shafts and axles to save gas? I
never use 4x4 any more.
What was Dodge thinking when they decided to get rid of locking hubs??

I have a 2002 Dodge ram 3500. It has alittle over 100K miles. About a week
ago it started to smoke severly. Its a greyish colored smoke. No
overheating is ocuring. Truck still runs fine. It started after I changed
the oil. I used Rotella 15/40 which the book said to use. Can anyone ...

Hello All, I am in the process of restoring my 1991 Dodge W250 4 WD
Cummings pick up and need some body parts that are not available from
the dealer anymore, such as body side moldings and custom parts such as
bed rail protectors, bug shields, etc. Does anyone know of any sources

12,000# mile marker hydraulic winch installation on an '05 cummins ram.
http://inlinediesel.com/tech/mm

My malfunction indicator light came on in my 01 Truck and called the
service department and they said no big deal just bring it in when you
can. With a little investigation I found that you can check the code by
cycling the ingnition from on - acc -- on -- acc -- on and it will

Hello, I am having a very strange sound in the steering of my 99
Durango. When I turn sharply (anything past10-20 Degrees from center)
there is a sound that sounds like a gear that is moaning or a spinning
part that is grinding. Does anyone have suggestion as to what this

three or so years ago, there was a guy in the newsgroup that worked at a
Dodge Dealership, and was able to run the VIN number for my 1989 Dodge Ram
truck, and give me all kinds of neat information about it, like factory
options, recall work done and not done, original selling ...

When I turn on my headlights, the left blinker indicator stays on and
solid even when I'm not using the left turn signel. I get the same
behavior without the headlights turned on when I use the left turn
signal. The actual blinker appears to have the same behavior as the