Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / November 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Removing transmission08 Nov 2005 03:14 GMT170
Have a 92 Dodge W250. The throw out bearing is starting to go bad. Has
anyone here pulled the transmission and transfer case as a unit? How bad was
it? Would it be better to separate them?
Any hints would be appreciated.
2000 Dodge Ram 1500 Fog Lamps Issues....08 Nov 2005 00:30 GMT1
My 2000 1500 fog lights will not come on.  When Iturn the headlights on and
pull the knob out the indicatore light inside says the the lights are on
but they really arent.  I checked the fues and the bulbs.. Please help
me-CHuck
2005 Dodge Ram fog lights07 Nov 2005 20:00 GMT1
I have a new Dodge Ram 1500 Daytona with foglights.
I would like the foglights to work on high and low beam,
would someone please email me the
instructions to allow this?
Bad fuel gauge?07 Nov 2005 11:55 GMT4
Lately I've noticed it takes a few more gallons of fuel to fill my tank than
usual. I normally only need about 26 gallons to fill up when the gauge is at
about 1/8th of a tank. The last few fills required 30 gallons or more. I
didn't think too much of it until yesterday. I ran ...
2004 speedometer twitch07 Nov 2005 07:58 GMT1
Anyone have a problem with a speedometer twitching on a 2004 Dodge ram
1500?  When The truck is stationary, the speedometer twitches between
0-10 mphs.
Robert
1998 Dodge Dakota06 Nov 2005 17:07 GMT2
Team,
How do you get to the back of the instrument cluster to change a bulb????
Thank you
Ed K
Heater Core? 2000 Dakota06 Nov 2005 16:50 GMT6
Over the past couple of days I have noticed a slight antifreeze odor when
running the defroster or heater. No leakage on the floor. The reservoir was
low but not empty. The last time it was added to was a couple of years ago
when the water pump was replaced.( second replacement ...
92 Dakota intermittent shut off05 Nov 2005 21:26 GMT3
1992 Dakota 318 A/T Will intermittently shut down  If I am travelling
at road speed the engine continues to turn, and in approx 8-10 seconds
it will start back up, own it's own.  It's just same as if you turned
the ignition off and back on except.when it happens, the tach falls to
97 Dakota05 Nov 2005 18:33 GMT1
Could someone please refresh my memory and tell me how to set the clock on a
stock radio? TIA
1985 Dodge ram 10005 Nov 2005 18:13 GMT14
I've been to every junk yard in the lower mainland looking for parts for my
1985 Dodge D-100 and can't seem to find any parts anywhere does anyone know
where one can get parts from???....
Vacuum leak ? On a stall problem 05 Nov 2005 06:36 GMT2
Hi Russ !
            I still havn't pinpointed MY problem........but it looks
according to a mechanic that looked at it, that it could be a (gasket)
vacuum leak somewhere between the carburator and  the intake ??? or the
Diff Lube Change05 Nov 2005 06:29 GMT2
My 2004 Durango Ltd. HEMI 4x4 just turned 15K miles, so it was time for
a change of differential lube front and rear, according to the Schedule
B Maintenance List.
So, I pulled up the required fluid types and amounts from my service
Towing mirrors04 Nov 2005 20:19 GMT2
We have recently bought our first pickup, a 2001 Dodge TD RAM 2500. Not
our first turbo (SAABs) but our first diesel and first pickup. It is an
awsome truck!
We plan to buy a slide-in camper and want towing mirrors.
1999 dodge ram 250004 Nov 2005 16:45 GMT1
Truck will turn over, but will only start if I press on the gas pedal. Once
I take my foot off the pedal, the truck stalls out on me. Anyone have any
idea's.
no oil04 Nov 2005 13:24 GMT26
I have a 1986 dodge 318 that is not getting any oil to the heads. Are the
pushrods in this engine supposed to have holes in them or does it oil some
other way? I've only worked on chevys until now.
Pages: 1 2 3 4 5 6 7 October, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.