| Thread | Last Post | Replies |
|
| changing horn, 99 Ram | 31 Mar 2006 20:00 GMT | 5 |
I've got a 99 Ram 1500 that I want to change the horn on. I got an air horn and can't figure out why the damn thing won't work. On the old horns there are 2 sets of wires, 1 for each horn. I tried just connecting the one set of wires to the air compressor, won't work. I
|
| 1995 RAM 4x4 1500 5.9 L | 31 Mar 2006 19:53 GMT | 5 |
I just purchased this truck for $100. It has a problem starting. When it decides not to start, you may have to wait from 10 minutes to a few days before it will start again. When you try to start the truck, it cranks just fine, but will not fire. Firestone charged $91.00 to tell
|
| 85 dodge w/ 318 | 31 Mar 2006 01:39 GMT | 3 |
still in trouble i was trying to adj the idle mixture but is a after market carb wiht no set screws to be found so i took it off to replace it. i took the old car ( holley, not sure model ) and found it full of charcoal, is this a common
|
| 2001 Dakota 3.9 running rough,stalled once | 31 Mar 2006 00:53 GMT | 1 |
I'm not up on working on cars much but i just got a 01 Dakota with the 3.9. It takes usually 2 turns of the key to start,runs just slightly rough liker i can feel a slight shake when stopped at a light,like the old distributor engines used to give when a little out of time. I was ...
|
| sticky brake peddle (75 Dodge PU) Power Brakes | 30 Mar 2006 23:35 GMT | 8 |
after giving my 75 Dodge the winter off. i went out to wake her up for some spring cleaning and a trip to the Dump. the Old Girl started up just fine : ) but when i put on the brakes the peddle was (vary hard to push) and (wouldn't return) the peddle stayed down making the brakes
|
| 1977 B-200 Sportsman body trim | 30 Mar 2006 21:08 GMT | 1 |
Can anyone refer me to someplace where you can buy new rubber door and window seals for a 1977 B200 Sportsman? It's a window van with the sliding door on the passenger side. Thanks.
|
| 2001 Dakota 3.9 running slightly rough??? Help! | 30 Mar 2006 19:53 GMT | 3 |
I'm not up on working on cars much but i just got a 01 Dakota with the 3.9. It takes usually 2 turns of the key to start,runs just slightly rough liker i can feel a slight shake when stopped at a light,like the old distributor engines used to give when a little out of time. I was ...
|
| 2000 Dakota loses power during left turn | 30 Mar 2006 05:37 GMT | 3 |
Very strange thing happening to my truck. When I take a left turn, in the ,middle of the turn, the truck stops responding to acceleration and when I straighten out it jolts forward and then everything is normal again.
|
| 1998 Dodge Dakota 5.9 r/t Deep Amethyst | 30 Mar 2006 05:32 GMT | 3 |
WV area ---call ( 304-788-4743 ) between 6PM and 9PM -----
|
| Adding a second battery w/isolator to 99 Dodge Ram 1500 w/AC | 29 Mar 2006 21:35 GMT | 5 |
I'm thinking of adding a second battery to my 1999 Dodge Ram 1500 and using a battery isolater. It looks like there is room on the passenger side that I can easily add a factory battery tray, however, there some AC hoses and other parts in that location. I have 2 questions
|
| coil question | 29 Mar 2006 18:42 GMT | 26 |
I was wondering what would happen if the coil was installed the wrong way (both wires going in are black, same guage (not pink and black-w-stripe as haynes says) -- would it start? Would it die after a block even when warmed up properly?
|
| dodge pickup | 29 Mar 2006 09:12 GMT | 3 |
i have a dode pickup and once you drive the truck for a while and you go to crnk it back up again, it dies. it takes it a while of the rpms up before it stays running. does anyone know what is wrong?
|
| durango ball joints | 29 Mar 2006 04:44 GMT | 4 |
Hi all, we have a side job coming up to replace ball joints on a 1998 durango it's the upper ball joints,but he wants to replace all 4. But I was wondering, I heard something about a recall or warranty or something.
|
| idler arms 79 B100 | 29 Mar 2006 03:02 GMT | 11 |
The idler arms on the van are making it hard to steer. Pretty stiff. These are "permanently lubricated" so they say. Can I drill and tap for 4 grease fittings and expect that to work? New ones would cost about $200.00 for the parts alone from a
|
| Any one know what to look for when trying to get a new transmission? | 28 Mar 2006 20:38 GMT | 3 |
Can anyone help me find out what i need to get a new transmission for my 1988 dodge dakota? i got the truck from my neighbor and the transmission was shot. i dont know what i need or where to find it to get the right trany. if any one could help that would be great.
|