| Thread | Last Post | Replies |
|
| 02-05 Towing mirrors needed | 20 Mar 2006 16:26 GMT | 1 |
Wife bought a 30' fifth wheel and the Daytona doesnt have towing mirrors, Would anyone here have a set of fold up - or any one want to downgrade to the stock electric: heated / power mirrors?
|
| 98 Ram v10 02 | 20 Mar 2006 05:00 GMT | 1 |
Surprised to find the harness for a 4 wire 02 setup on this truck - and only using 2. anyone experience adding the upstream ones, and is there benefits other than losing $100 in sensors?
|
| Car (Including Truck) and Deep Cycle Battery FAQ | 20 Mar 2006 03:55 GMT | 1 |
The Car and Deep Cycle Battery FAQ has been updated. The current version is 5.4, dated February 26, 2006 and can be found on www.batteryfaq.org. Answers to Frequently Asked Questions, tips, manufacturer's information, references and hyperlinks are contained on
|
| 2 Cummings questions | 19 Mar 2006 23:27 GMT | 9 |
How can you tell the difference between Turbo Diesel and HO Turbo Diesel? Would the VIN have different number? Before I have heard 2 distinctive engine sounds coming from Dodge Rams. One type is the regular clanky noise same as you would hear in either Ford
|
| clutch | 19 Mar 2006 21:59 GMT | 2 |
Hey everyone, Went to look at a 2500 with Cummins & manual tranny. The clutch did not start "catching" until the pedal was 1.5 inches from the top and it did not lockup until it was 1/2 inch from the top.
|
| my dakota keeps stalling (1993 V8) | 19 Mar 2006 17:19 GMT | 3 |
i dont know whats wrong but ive replaced the ignition coil, spark plugs and wires, ignition coil, distributor cap and rotor and the fuel filter. it keeps stalling more and more frequently
|
| Changeing plugs in a 2004 jeep 4.0 L? | 19 Mar 2006 14:04 GMT | 1 |
I need to change the plugs in my wife's GC. It looks like DC put a coil on plug bar over all 6 plugs. 3 bolts and maybe a clip by the firewall. How big a PIA is this? Any tips, help would be appreciated. Thanks, Derrick
|
| 1998 DodgeRam Quad Cab 4x4 | 19 Mar 2006 06:27 GMT | 4 |
Hi, all. I just purchased a 1998 Dodge Ram Quad Cab 4x4, with the 5.9 v8, 1500 heck of a nice truck,wont go back to anything else. Is there anything I should be aware of,major problems, except maybe the transmission? The truck looks like new, low miles, Thanks in advance ...
|
| Removing Rear Window on 1995 Dodge Ram | 19 Mar 2006 01:32 GMT | 3 |
Has anyone ever removed the factory sliding rear window from a Dodge Ram ? It appears that the headliner and the various interior components must be removed. After that, what else is involved ? Does Dodge uses any adhesives to keep the window in place ? Is this
|
| Dodge LRT VIN swap --- on eBay | 18 Mar 2006 18:51 GMT | 8 |
Has anyone else noticed this Dodge LRT (on eBay) with some kind of VIN boondoggle ? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4620648945& sspagename=STRK%3AMEWA%3AIT (auction number 4620648945)
|
| OBD2 check engine code readers and erasers | 18 Mar 2006 12:00 GMT | 2 |
Some were asking about OBD2 check engine code readers and erasers. This EBAY store has them too and the auctions start at 1 cent !! Good Luck. http://stores.ebay.com/OneSmartMove
|
| Cummins 5.9L diesel with biodiesel | 18 Mar 2006 00:30 GMT | 18 |
I would like to know if anyone has had experience or knows whether biodiesel will compromise any seals or gaskets in a 2001 cummins 5.9L diesel. I want to use biodiesel in my truck to reduce emissions.
|
| Ping: TOM L. | 17 Mar 2006 23:48 GMT | 7 |
Hey Tom... It would appear to be a code 0161... (after that, I got a dashed line and then "done" ) Mac
|
| High oil pressure? | 17 Mar 2006 19:28 GMT | 7 |
Happy St. Patty's day... As I was reading this newsgroup, my wife called and said that she was bringing the Dakota home... got a check engine light a few blocks from home and needed to trade trucks and get to work..
|
| hoisting 400 cc engine out of 4x4 ram on 32" tires in 30 inches of snow | 17 Mar 2006 16:00 GMT | 27 |
Hi all you artful dodgers with creative ideas! Do you have any suggestions you think might help -- willing to rent the available equipment of course -- sold the 400 cc but guy prefers it be pulled out and delivered and is willing to pay for it
|