I have a 2000 4x4 short cab ram.
I can hear the front driver side wheel squeak when I am close to a building
driving very slow ( like fast food drive thru slow). Is it easy to repack
and/or replace the bearing or do I need any special tools.

I have a new sound coming from up front as I drive. It sounds like
"clunk...clunk...clunk...clunk" when I drive real slow.  When I drive a bit
faster, it sounds like (read this part a bit faster)
"clunk...clunk...clunk...clunk". :o)

Our freshly rebuilt '97 Ram (2 new cyl heads) just spit out a new code
last night sitting at a rail crossing, idling for several minutes.
P0441
What is it and what is the cause and usual fix?

like the subject line says, this is budd's birthday.

I've got a '95 Ram 1500 with 5.9L engine and automatic transmission.  I just
had the tranny replaced with a pulled unit from the junk yard and it's a
great improvement over the original that was on it's way out.  The new
tranny shifts strong but has a couple of quirks.

My '01 Ram 1500 4x4 lately has been squeaking when turning the wheel
either way.  Usually occurs when backing into the driveway, or turning
a corner slow from a stop.  Shocks seem good, ride isn't rough.  Didn't
know if this is a ball joint or tie rod or whatever?  Any help

i want to add an additional fuel tank to my truck, but due to a slide-in
camper i cant use one that fits in the bed.  i need an under-bed fuel tank,
the bigger the better.  does any such tank exist?  id like to be able to
drive from montana to north carolina without having to ...

Stick my head in to see what's going on and 1,129 unread posts. No way am I
gonna go thru that mess. So what have I missed??? How you all have been
playing nice.. <G>
Denny

Does anyone know where I can purchase dealer seat covers for a 2001
Dakota online (or equivalent quality)?

1992 b250 van 318 cu - very low miles
Twice over the past year, which is about all I've used this truck, after
about an hour at 75 -80 mph drive, the truck would not re - start when it
was shut down for a brief stop. It acted like the ballast resistor was going

I have a 2000 Dodge Ram Sport with a Magnum 5.2 with 90,000 on it. I want
to build a back up motor with more oomph! I acquired a fully intact 5.9
for a song and a dance and will do a full teardown, machining & rebuild
over a period of time .I heard that the block is the same all the ...

MY WINDOW WILL NOT STAY ON THE TRACK WHEN THE "DOWN" BUTTON IS HIT, IT
SLAMS DOWN INTO THE BOTTOM OF THE DOOR. CAN ANYONE TELL "THIS GUY" (I
JUST SPIT AND SCRATCHED MY BALLS) WHAT PART IS BROKEN. EVERYONE ELSE
HAS REPLYS TO THEIR QUESTIONS BUT ME. HOW COME, Y'ALL???

I want to make a topper hoist for my garage. Then I can disconnect my
topper and hoist it up to the ceiling out of the way. Lower it again to
put it back on.
Does anyone have any suggestions? The topper weights around 180 pounds.

Thanks in advance for any help on this:
2004 Dodge Ram Quad Cab, Hemi Sport package.
Interior is dark slate gray with cloth 40/20/40 seats - driver seat has
power.

The problem is my 2002 Dodge ram 1500 shakes when ever I'm on the Frwy
going over 65 MPH. I have 20 Inch Goodyear eagle tires and I get them
rotated evry 5,000 miles or so. I took my truck to Dodge and they said
stop the shakinging I need to replace the front 2 tires and get ...