Greetings All,
 Just tried to use my ac and it only blows hot air. Any simple way to
tell whether it's low freon? I'm going out there now to see if the
compressor is kicking in. Anything else to check before I have to take

installing link arms on the front, the driver side cam bolt is striped.
where can I get a replacement?

I have a 2003 dodge dually. When towing 15,000lb trailer, I encounter
occasionally encounter a severe shudder in brakes when starting out and
at low speeds. I have taken to dodge dealer and had all calipers and
rotors replaced and it will still do it occasionally. It feels like the

I'm considering purchasing a used 2002 Dakota Quad Cab SLT 4x4 w/90,000 km
from a dealership. It has the optional AWD.
Body and interior appear straight and clean.
Dealer says the entire front differential, rack and pinion and rear axle

I have a 96 dodge ram 1500 5.2 auto 137000kms For the last month or so when
I start it cold it will start then stall immediatly I have to keep my foot
on the gas to keep it running after a few minutes it will idle on its own
and is fine warm starts are no problem. My dealership says ...

I have a 2001 GRAND CARAVAN with a 3.3 the cooling fans will work when
I wire them directly to the battery not any other way. I have also
changed the cooling fan relay 3 times and it still dosen't work can any
of help?   THANKS jaywd2

Pulled the codes on my '94 DAK and the only one I got was # 55.
As far as I can tell that means there are no codes set, correct?
Thanks.

My truck was running around the gulf coast before I bought it.  The
undercarrage has some rust -- far too much for my liking.  What's the
best way to stop the corrosion at it's current level and stop any new rust
from forming?

took the liberty to the dodge dealer today. got it back after a few hours
and they said they had to order the #3 glow plug. says that was the reason
for the check engine light (just come on a few days ago) and the miss. i
guess ill be convinced when i see the simptoms go away in a ...

I bought a dodge that has been lifted, sure would like to bring it back to
stock specs.  In the rear, looks like I have 5 or 6 inch spacers added on
the rear axle.  On the front, the truck has single shocks and looks to my
untrained eye to use longer main springs.

Where do you folks get replacement seats?  I was thinking about something
like a hi-back bucket.  Maybe with a swivel base.  Recaro?
What do you folks use??

I wanted to remove temp sending unit on a '96 2500 w/Cummins.  I know
where the sender is supposed to be but I can't lay a eyeball on it - it's
well hidden (drivers side rear below #6 valve cover).
I reached my hand in there and think I found it once but I could not

In effort to fight what we believe to be unfair sales and labor
practices as well as stand up for  Hispanic women's right to work in
a company dominated by white males - Group 1 Automotive, Inc., we're
organizing a boycott of the Group 1 Automotive, Inc. Dealerships.

I'm having a... discussion... with my stepfather.  His KIA dealer has
told him that he is "not authorized" to know the ODBC codes, or some
such thing.  That it is "illegal" for different vehicle manufacturers to
share codes.  There's more, but that's the gist of it

The Hazard Warning Flasher works fine, but the right or left turn
flashes doesnt. Were are the relays that control this lights.
The fuses may be ok, other wise the Hazard warning Lights were not
working?