I'm looking to order some chrome bed rails. Anybody have experience in
ordering these online and can recommend an online retailer?

i believe my dana 44 has kaboomed. i was wondering what my options
would be as far as ugrading here. possibly going to a locking hub? what
will fit on a budget?

I have a 1996 1500 Ram 4X2, 5.2 engine, 4 speed auto, extended cab, and 8
foot bed. It has 280K miles on it and the transmission has about 100K since
the last rebuild. At the moment I am having no problems with the
transmission, however I know it will not last forever. I was ...

I changed the filters and fluid on my 1500, but I filled it a little to high.
The level is almost to the "Hot" level when the engins is cold. Do I need to
remove some of the fluyid to bring it down to the "cold" level line. I do not
understand why when I have the trany hot, the ...

I noticed that the gas filler tube on my 05 Dakota doesn't have a
metal, spring-loaded door on it.  Is this normal, or did mine break
off and fall down into the gas tank?  
If anyone else has this vehicle, can you check?   It is a V8 quad cab,

has anyone used the steering column mounts from gauge works by auto meter?
as found on Geno's Garage website?
im looking at adding some more gauges and looking for the best looking
instalation possible.

Anyone know much about this new vehicle?  I'm thinking about selling one
of my trucks (don't need more than 1 anymore) and getting something just
to commute back and forth to work in.
The new Caliber uses almost entirely new technology (at least for Dodge)

Came on over 3 days.At first,it had to crank a few seconds to start---(( The
OLD  1st Generation Cummins NEVER cranked more that one second & they were
running))
(acted like a fuel leak in the line & it had to crank a second to pick the

Anyone have any luck getting repairs covered or partially covered just
past an extended warranty period?  My Maxi-Care Chrysler warranty was
for 75,000.  $1000 worth of repairs are needed just 400 miles past that.
 Is it worth calling DC and whining to get maybe partial ...

Has this series dodge trucks had a history of transmission / clutch
problems?
It was running fine, I stopped at a traffic light, put it in neutral, when I
tried to shift to first I could not get it in gear.  I got it to the side of

I emailed Dodge to see if they were planning on offering a diesel 1/2 ton 1500
or Dakota next year or in the near future. Their response was negative which
was the same response I received after also emailing GM and Ford. Toyota
states on their web page that they have no plans to ...

I'm looking for help with my hitch pin. I pull a 5500lb trailer. The pin I
use to hold hitch in the received measures .625 (5/8th of an inch) but whole
in the receiver on the truck is more like .68 which is about the same
diameter of the whole in the ball carrier.

I saw a topic posted on this web page about 3 months ago that described
the problem I'm having with my daughter's car.  The problem is
described below:
... it developed a problem of suddenly

I'm looking for a little knowledge. My old truck just had one mode "tow
haul" used while towing. My 2006 5.7 cad cab appears to have 2 modes. Push
the button once and it says it is in "tow haul" mode. Push it again and "tow
haul" goes off but now "Over Drive Off" is displayed. I've ...

A friend and I are about to install a back up camera on 2003 Dodge Ram
2500, with the Cummins diesel and five speed manual transmission.
Actually, the electrical really isn't the issue. Before we went hunting
all over the cab, is there an easy spot to run in the video cables from ...