| Thread | Last Post | Replies |
|
| Questions with installed Jake brake | 14 Jul 2006 03:53 GMT | 5 |
I am considering having a Jake brake installed on a new 2006 or 2007 Mega cab with the auto tranny. Is there an on/off control switch in the cab to activate the brake when towing and deactivate with around-town driving or once installed is the Jake continuously active? Are there ...
|
| Oil PSI gauge - T Fitting | 14 Jul 2006 03:44 GMT | 10 |
I just got a set of gauges for my 92' Power ram 150 / 318 V8. I understand that in order to keep the orignal oil psi gauge and light working i need to use a T-Fitting at the sending unit. The gauge I bought is a mechanical oil gauge. THe orignal oil gauge works, but I
|
| 2000 Dakota freeze plug leak | 13 Jul 2006 06:39 GMT | 3 |
I have a 2000 Dakota 3.9L with a freeze plug leak. Is there any way to fix this without removing the tranny? I live in Central Florida so I really dont have to worry about freezes. Is it possible to seal it somehow?
|
| Tansmission downshifts by it self | 12 Jul 2006 23:16 GMT | 1 |
I have a 98 ram 1500 4x4 5.2L auto. Here's the problem, driving along is ok most of the time. but sometimes it seems fine then I let off the gas and when it slows to below 50mph it hits third then secound. i give it the gas and it may shift or not and if it does it hits hard, also ...
|
| 30 Day Free Trial. Start Today And See your First Check in Just One Week | 12 Jul 2006 22:15 GMT | 2 |
Hello $Friend I just came across something so innovative, I thought you would appreciate being one of the first I notified. I recently discovered the simplest way for you and I to build a
|
| Alignment pins/holes in 05 ram | 12 Jul 2006 12:21 GMT | 2 |
I want to take the "ram 1500", "SLT 4X4", and "5.7L Hemi" decals off my 05. I can get them off without screwing up the paint, but does anyone know if there are alignment pins through the body? I don't want to do any bodywork for it...
|
| Need Hood for 1998 - 2001 Dodge Ram 2500 - Diesel | 11 Jul 2006 20:05 GMT | 1 |
Looking for a hood for a 1998 - 2001 Dodge Ram 2500 Diesel. Prefer Red. Must not have dents / dings.
|
| Anybody here have experience with Auto A/C? | 11 Jul 2006 19:05 GMT | 1 |
I have a 99 B1500 van with main and Auxillary air conditioning I have no cold air in the front, but the rear a/c is nice and cold I replaced the front hot water valve which was leaking water in the closed postition, but the problem remained Sometimes when I start the van it is a ...
|
| Ram van engine clciking under acceleration | 11 Jul 2006 14:23 GMT | 4 |
I have a 2003 Dodge Ram Van 1500, and it has recently developed a clicking noise to the right of the engine when the engine is under acceleration. Not apparent when the engine is idling or not under a load. Any ideas what it might be? Clark
|
| 93 Dodge Grand Caravan 3.3 L engine | 10 Jul 2006 22:57 GMT | 1 |
We are having severe problems with our van overheating. So far we have replaced the waterpump, the tensioner, the radiator - to a tune of $800 + we can't afford more - couldn't afford that. But it is still overheating. Now the mechanic is telling us there is a very small leak
|
| 1995 Dodge Diesel | 10 Jul 2006 20:53 GMT | 6 |
Trying to sell this truck. The question is, "how much 'repair' to put into it or do i just sell it for junk?". The truck is not in running condition. It would therefore need to be towed or hauled to a shop for repairs (batteries, fuel system cleaned
|
| Towing with Cummins kicks A$$ | 10 Jul 2006 16:39 GMT | 7 |
After having my 2000 2500 CTD for 4 months I finally did my first heavy tow on a 2000 mile trek. The first leg started in the Sierra Nevada Moutains heading to Lake Tahoe. Going over the summit was a breeze. The convoys of gasoline trucks towing
|
| 1997 Dodge Ram 'Death Wobble' | 10 Jul 2006 11:42 GMT | 6 |
My 1997 truck had recently developed a violent shake of the front end when I'm on the highway and approach speeds of 50 MPH. It feels like the axels are going to come right off - very scary. I've heard what is described as a death wobble, and that it might be caused by a worn ...
|
| New Gauge? | 10 Jul 2006 03:38 GMT | 3 |
I just got 3 new gauges for my 92' Ram 150 318. I got the Engine Coolant Temp / Battery / Oil PSI. The quistion is does any one know where the Coolant temp sensor goes (thing at end of gauge)? I think I found it but i'm not 100% Sure. Its right beside the coolant hose
|
| axle gear | 10 Jul 2006 00:20 GMT | 22 |
looking for a new set ring & Pinion for a 2005 3500 4x4 we have 4:10 now lower 3 ?? highway we have all kinds of power just the RPMs are to high at high speed.
|