| Thread | Last Post | Replies |
|
| fit for truck cap | 06 Aug 2006 20:22 GMT | 4 |
I have a 96 ram 1500 4x4 shortbed, and i'm looking to buy a used cap. Will short bed caps from fords and chevys fit my dodge? my bed measures 80 x 68. please email any info to johnagner@hotmail.com
|
| Who is KRP? | 06 Aug 2006 15:01 GMT | 7 |
Who is Ken Pangborn and why is he making such a complete pain in the rear about himself?
 Signature Kyle :o)
|
| lose guages and idiot lites come on | 06 Aug 2006 14:54 GMT | 1 |
i have a 2004 ram 2500 diesel. air bag lite,abs lite,come on and i lose all guages. after driving vehicle for an hour everything is fine
|
| Online accesories? | 05 Aug 2006 16:29 GMT | 2 |
Anyone have any experience (good or bad) with buying things like vent visors, chrome trim pieces etc. online? I have been looking through ebay but thought I'd get some input from the group first. Thanks,
|
| 91 Dodge Ramcharger shifting iregularities | 04 Aug 2006 23:37 GMT | 3 |
My 1991 Dodge Ramcharger, 5.2L, (318) V8, auto trans,. I have had this truck since it was built. I special ordered it and picked it up with 7 miles on it. I have taken great care of it, getting it lubed and changing all the fluids on a regular basis. Granted, my truck has
|
| tick or short grinding noise in steering? | 04 Aug 2006 13:24 GMT | 1 |
2001 Dakota 4x4. Just had the tie rod ends replaced, which helped some issues I didn't even realize the truck had 'till it didn't have them any more... However, I'm still noticing a noise, like a tick or perhaps like one
|
| mult fuel ? | 04 Aug 2006 02:21 GMT | 7 |
I have a 99 dodge ram 1500 with the 318 and auto. I know i can convert it to run on LP gas, anyone know of a kit that will allow run LP gas and/or GAS?? At 1.75 gl for Lp would sure cut down on costs.
|
| Dakota brakes | 03 Aug 2006 08:05 GMT | 3 |
02 Dakota 4WD 3.9L, 48,000 mi. auto trans Front pads are seizing up against the rotors on both sides. Has done this three times but not every time I drive it. After last time I pulled assembly apart--calipers seemed OK and I cleaned slide surfaces for pads but
|
| Rear end ratios 3.21 vs 3.92 | 03 Aug 2006 04:54 GMT | 43 |
I'm considering a new Dakota and was wondering whether to go with a 3.92 or the standard 3.21 rear end. Most of my driving is city and I occasionally pull around 5-6K pounds, but not frequently. Will the 3.92 have a gas mileage impact around town? I know it will on the highway ...
|
| '97 2500 4x4 front end goes -clunk- | 03 Aug 2006 04:39 GMT | 12 |
My front end is making a clunking sound. It happens half a second before I come to a complete stop and happens again with a half second or so of taking off. The steering tends to wander a bit as it goes down the highway.
|
| Delo 400 vs. Delvac | 03 Aug 2006 01:32 GMT | 1 |
Are there any studies out there that compare Chevron's Delo 400 to Mobile's Delvac diesel oils? I usually run Delo, but in my last discussion about synthetic oils, someone mention Delvac. I am about to change my oil. I decided to stay with Delo
|
| Dodge Ram with Front Frame Rail Damage? | 03 Aug 2006 01:28 GMT | 29 |
I was just about to buy a used truck (2004 Dodge Ram 4x4 Diesel) and just before we finalized the deal, I found out it was in an accident (even though the dealer said it was not - even in WRITING). When I obtained detailed claim information from the insurance company, I found
|
| 97 Dakota, lose of power, backfire, lopes in gear(repeat post). | 02 Aug 2006 16:54 GMT | 3 |
I have posted twice before on this truck, and have received some well thought out, knowledgeable responses, but none have fixed the problem. I have changed: Sparkplugs, Rotor, Distrib Cap, Sparkplug wires, Coil.
|
| Amsoil Oil??? | 02 Aug 2006 01:51 GMT | 17 |
I have been looking at purchasing Amsoil oil for my 2003 Dodge Diesel. I have read all the specs and publications. The oil is expensive, but they claim it has extended life. Does anyone use Amsoil? Is it worth the switch? Any performance comments?
|
| Oil Psi | 02 Aug 2006 00:29 GMT | 1 |
I'm putting a new mech.oil osi gauge on my power ram 150. I got aT and everthing, I just need to put it on. Going to keep the stock gauge working. I'v herd that the stock elect. oil guage is not to good, so i'm putting a mech. guage in. What kind of socket do I need to get the
|