Remember you told me that Wal-Mart had the thing that you could use so a aux
socket would power more than one item? Anyway I can't find it. Spent some
time on line at Wal-Mart's and nada. Any thoughts?
Roy

I know that you can adjust the computer for more horsepower, but can you take
some power out of it to get better fuel economy? I'm 40, and dont care about
all the power but want to save some on my 14 miles to the gallon highway. If
you can how or who can do it. (please dont sugest ...

I'm looking for a 12v power source on the driver's side - one that
goes off with the key.   Is there an easy spot to do this or will I
have to run one in from the fuse box in the engine compartment?

I've set up about 5 axles, a mix of Ford 9" and D44 and have the equipment,
experience, and success rate ;^)
The issue is I always have done a complete gear swap. I only plan to replace
the bearings on my 98 since the R&P look fine and I caught the bearings early

And posting with avengeance.  
I knew he couldn't resist our sand box for too long.  Let the games begin.
Ya don't suppose snohole is paying Budd to take the heat off if him do ya?
Now if we could just get Little Jay to come back.

When I get my a.s to FL I'm going to need a 'putor for the house. I want to
leave this one here in MA for Sue to use and the time's when I come up. I
don't do a bunch of gaming but I might. I do a lot of reading on the net. I
like a BIG monitor for all the pink bunny pic's. I ...

OK guys... My plan for now is as follows.
0. The noises that I have are of two distinct kinds, a whining noise
that appears when I ease the gas pedal, and grinding noise that I hear
at low speeds.

Okay Tom,  If the truck is in low 1 or low 2 it does not jerk.  It will
not jerk in reverse either.  Only in drive.
Any suggestions?
Dirtclod

I just bought a used 2003 Quad Cab SLT 4x4 yesterday (4.7L).  Great
truck!  I haven't gotten a jack under it yesterday to spin a rear
wheel to check, so I'm going to ask here....
Does anyone know if there's a way to determine if this has a factory

2000 Dodge Ram 1500 5.9l 100k miles.
Setting code p0442.
I found a cracked hose on the tee at the solenoid valve - and code
disappeared for a week....

I just bought my new truck and I have been searching for
"In channel" side window deflectors but have not had
luck. Dodge sells the "stick on" or "tapped" kind instead.
Anyone had any luck finding some for your's? I am aware

I'm looking to move to Florida this fall and I was maybe looking into
renting a small truck (Uhaul, Penske, etc) and a trailer to put my suv on.
It's a 2002 Durango STL+.  However, none of the carriers offer a trailer
that can accomodate an suv of that size.  Anyone have any ...

O.K. dodge guru's figure this one out. Dodge ram 1500 4x4 quad, 100,500 miles
and new balanced tires, brakes and rotors. When initially taking off from
stop, and without touching gas, truck shutters ever so slightly but enough to
see out rear view mirror. As soon as I touch the gas ...

I decided to take pictures as I go along. See
http://igor.chudov.com/projects/Automotive/Drivetrain-Noise-In-Dodge-RAM-1500-Pickup/
Some findings as I opened up the differential.
1. It is full of gear oil. (means my oil change 2 years ago was successful)

I will not take part in this place ever again. You are all idiots.
SnoMan