| Thread | Last Post | Replies |
|
| Dodge Dakota brake/ABS lights. | 26 Sep 2006 20:37 GMT | 1 |
Every morning I get in my 1998 Dodge Dakota, 3.9L, Auto tran. 2WD, start it up and drive approximately 7 miles. I then park it, where it sits for approximately one hour. I then start it for the return trip. When I start it this second time, without fail the brake and ABS
|
| Changing tire szes | 26 Sep 2006 20:10 GMT | 9 |
I hope I didnt just make a big mistake. 2002 Dodge Ram 1500 quad with 4wd, 100,500 miles. I just today replaced the Goodyear tires 275/60/20 with Michelin Cross Terrain 305/50/20. Now my worry is that since these tires are about an inch shorter (lowered my truck an inch) how far off ...
|
| On Topic Posts | 26 Sep 2006 15:47 GMT | 5 |
Well, since I am a feebleminded a.shole (according to Craig C.) and as it appears that he is the new self-appointed moderator and net nanny of aadt, I guess there are no more post allowed in the group, an un-moderated one at that, unless it pertains specifically to dodge trucks. ...
|
| UPDATE 4, Bad News -- Replacing rear bearings on a Dodge pickup? | 26 Sep 2006 05:04 GMT | 13 |
I pulled the axle and installed a new Torrington bearing and a new axle seal. I also put in a rare earth magnet on the bottom of the diff gear case. (far from gears)
|
| 2000 Dodge Grand Caravan Speedometer / Tranny | 26 Sep 2006 01:55 GMT | 6 |
Does anyone have any insight as to what may have caused the odometer to stop working along with the tranny to start slipping? I haven't had a chance to look under the vehicle yet to see if I can see any fluid leaking. My wife said she was headed out of town when she
|
| rough take off | 26 Sep 2006 00:14 GMT | 6 |
I have a 2000 CTD 4x4 2500 and have asked for help on more than once or twice. You guys have been very helpful. I started to notice that when I take off from a complete stop I feel a swift jerk. I feels as if the truck is not completly in gear and when I take off it jerks into ...
|
| Bio-TERROR in America: The Government of Torture! | 25 Sep 2006 20:50 GMT | 8 |
AMERICA IN DANGER of its own out-of-control Bio-Terror: Is 1984 here? Or cripping... God help us, blinded! Originally Secret Bio-Aerosols are misused to HARM and Torture in
|
| Denny: Your office chair | 25 Sep 2006 18:05 GMT | 41 |
All it needs is a cup holder and you're all set! http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=91495 Mac https://home.comcast.net/~mac.davis
|
| Ping..Mac | 25 Sep 2006 15:32 GMT | 4 |
I got a couple of stocks that I put tung oil on before you got me started on Danish oil. I like the Danish oil much better. Can Danish oil be put on over the Tung oil or does the Tung oil need to be removed?? Denny
|
| RCR | 25 Sep 2006 05:29 GMT | 16 |
cars placed 1st and 3rd today. Nuf said. I think the lazer cut rims was just to see how gulible NA$CAR fans are. beekeep
|
| UPDATE 3 with DETAILS of What Broke -- Replacing rear bearings on a Dodge pickup? | 25 Sep 2006 04:14 GMT | 19 |
I discovered some fascinating things about where that broken piece comes from and why it fell off. It looks to me like it was improperly installed at the factory. http://igor.chudov.com/projects/Automotive/Drivetrain-Noise-In-Dodge-RAM-1500-Pickup/
|
| fel-pro intake gasket set plenum leak | 25 Sep 2006 02:25 GMT | 1 |
I got a Fel-Pro intake manifold gasket set part #MS 95392-1 for my 1998 5.9 liter Dodge 4x4. The plenum is leaking oil into the manifold. My Haynes repair manual tells me the intake gaskets should be marked left & right, they are not. Does the smooth side of the gasket go toward the ...
|
| Ole Snowjob | 25 Sep 2006 02:06 GMT | 7 |
Our old buddy is getting beat upon over in the 4x4 chevy group. Better them than us....... Is that tears I hear dripping on the ground??? <VBG> Denny
|
| 2000 dodge ram 1500 quad cab rear door problem | 25 Sep 2006 00:51 GMT | 6 |
Hi everyone. My husband is having a problem opening the rear door on his truck. The bottom latch will not disengage so the door will not open. He removed the inside door panel, checked the rod that goes down to the lever arm. everything looks ok but the door won't open.He says that ...
|
| new headlights | 24 Sep 2006 19:13 GMT | 7 |
I bought projector headlights and installed them tonight. the low beams are working but I am getting a back feed on the high beams. let me explain, the low beams are bright, but the high beam indicator glows dim, the high beam bulbs have no glow. when I switch to high beams, the ...
|