my wipers only work on high and low. the won't work at all on any
delay setting, nor will they return to park when shut off. when the
washer button is pushed the squirters work but the wipers won't
cycle??? any ideas??????????

Would you oil burners stick with mopar or look at both?
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm

Recently, I received my truck back from the body shop, after they fixed
the back fender.  Initially we were quite happy with the work - panel
looks good as new from arm's length.  I have no quarrels with the
quality of bodywork, or the paint matching.  In most light, it is

Anyone know what the heater output temp should be for a '00 Dakota 3.9,
39k miles? With the temp knob turned all the way right I get 130º at
the floor output and about 100º with the knob straight up. I've read
in other forums people getting 155º. I'd like to get some opinions

Sold the poorly made Dodge 1500 truck, unlikely to buy another, so I
will be off for some unforeseeable time.
I want to thank all people whose advise was so valuable in making
various repairs to this truck over the years. I want to wish luck to

I, unfortunately, find myself in need, or great want, of a 3/4 ton
diesel pu. After test driving, I like the Dodge first, then the Ford,
and a distant third is the GMC.  Scratch the GMC.  Ford is suspect
because of the PSD problems.  Cummins is my first choice, but then I'm

Since I got rid of the truck, getting rid of the manual CDROM seems the
only logical choice. It is FREE to the first person to mail their
address to ichudov AT algebra DOT com. There is NO catch and you do
not need to pay postage or send a SASE.

What size are the clutch & flywheel set for my '64 Dodge longbed slant 6
225 c.i. with 3spd on tree?
10" or 11" inches?
TIA.

Can anyone tell me what type of bulbs go into the fog lights as
replacements?  WOuld rather buy the bulb before pulling the light
assembly apart.  Thanks for your help.

A little while back, the truck started making a little noise when
backing up - like a cricket, just a couple of peeps, then nothing.
Then, I started noticing the noise occasionally, but only when the truck
window was open.  Now I can hear it with the window is closed - it

I currently have LT245-70-R-16 on the truck....I saw another truck the
same model and year with LT285-75R-16..........will using a slightly
larger tire mess up gearing or affect the transmission (automatic) or
rear diff??

I've been having adventures in starting with this truck and I was wondering
if any fault code data is retrievable that
would help in diagnostics.  I don't want to take it to a shop just for them
to be changing parts to find out what's wrong.

It is CUMMINS.........not Cummings..................

     I am thinking of fixing this myself. It is a 2001 Dakota 4x4 with
the V-6. I have done major overhauls on motorcycles, lawnmowers and
such, but I have never had the chance to do a rearend job. I assume
there are some tricks that I should know, can you help me? Any special

Went to start my truck today and my gauges stopped working.  Been
working fine since day one.  Truck runs perfect.  The odometer says "No
Bus".  Up towards the map lights where the temperature reads, it states
"CCd".  Check engine, ABS, Fuel Light, and Air Bag light are on.  Will