| Thread | Last Post | Replies |
|
| LOANDBO JEWELRY AND MORE! DESIGNER NAMES! NEW ARRIVALS! JUST IN TIME FOR CHRISTMAS!!! | 16 Dec 2006 03:32 GMT | 1 |
VISIT OUR E-BAY STORE FOR A GREAT SELECTION OF HIGH END JEWELRY ITEMS-STERLING, MARCASITE, ONYX, MOTHER OF PEARL, DESIGNER BRANDS AND MORE! FOLLOW THE LINK BELOW TO VIEW OUR AUCTION AND INVENTORY ITEMS: http://stores.ebay.com/LoandBo-Jewelry-and-more_W0QQssPageNameZl2QQtZkm
|
| 12 volt impact wrench | 16 Dec 2006 03:08 GMT | 2 |
Anyone tried one of these lighter plug impact wrenches? I got to change a tire a couple weeks ago, and really coulda used an impact. But do they do any good, or are they all hype and no torque?
|
| differential problems in a 2002 Dodge Ram 1500 4x4 sport | 16 Dec 2006 02:11 GMT | 4 |
Has anyone had problems with their diff? they are telling me that i need a whole new diff and because it is one piece i need to replace the axles and everything in the rear end. I'm only 19 and a girl and i think they are just trying to get my money, has anyone had problems
|
| High Volume Oil Pump vs. Standard Oil Pump? | 15 Dec 2006 14:25 GMT | 10 |
I have to replace some rod bearings and while I am in the motor, I mught as well do it right. As far as a new oil pump goes, they show 2. One being a high volume pump tha says it pumps 25% more oil. Would this be a better replacement pump since the Dodge 5.2L engines have had oil ...
|
| heater fan on 02 durango | 15 Dec 2006 03:36 GMT | 4 |
The fan on my 02 durango doesn't work on the first three settings. You have to turn the fan on max to get heat then it blows like crazy. The max setting for the fan is the only one that works. Heat works fine ists just the fan that is acting up. It seems weird because I only ...
|
| Heat related problem | 15 Dec 2006 01:12 GMT | 1 |
About a year ago my Dodge Ram v6 started missing shortly after starting but settled down after a few minutes. Now it runs until the engine is hot, starts missing and then stalls completely. When it cools it repeats the behavior. Have replaced spark wires, dist cap, and coil to
|
| Dodge Nitro - Opinions/Experiences | 14 Dec 2006 22:02 GMT | 11 |
Anyone have any opinions or experience with the Dodge Nitro yet? Anyone heard of a plan or rumor that a diesel version is planned? My lady likes them and is starting to hint. Craig C.
|
| 97 Dodge RAM 1500 cruise control | 14 Dec 2006 18:35 GMT | 2 |
I have 97 Dodge RAM 1500 Extended Cab PU (5.2L) and really enjoy it but my cruise control has apparently went out. The cruise control button in the steering wheel will come on but it will not engage. After about 1 minute, the system will turn itself off.
|
| Astonishing Secrets Of The Biodiesel Maker In The World | 14 Dec 2006 17:28 GMT | 1 |
Oil companies are pulling in record profits and the government says they can't do anything about it. Hurricanes have knocked the oil refineries down and you can feel it at the pump.
|
| 95 Ram Van 2500 Chatter | 14 Dec 2006 16:48 GMT | 1 |
I have a 95 Ram 2500 and it won't always start if it sits too long. I have to turn the key to the on position and wait 10-15 minutes, sometimes longer before I hear chatter coming from the ignition coil. I've change that but still no success. New batter, new starter. I
|
| Headers for an 86 Ramcharger | 14 Dec 2006 13:07 GMT | 7 |
Hedman Headers references a set of ceramic headers that will fit the A-type engine for my year. (360 4bbl) How do I determine what the A-Type is and whether I have it. It does not seem to be VIN # related according to the VIN decoders I located via google for my year.
|
| installing autometer gauges | 14 Dec 2006 09:00 GMT | 2 |
I've got a '97 2500 that needs 4 gauges installed. I looking for a sanatary install - something as clean as a factory install. Need to keep the dash and left column clear because I don't need any vision interference with my night vision. Was thinking, maybe these
|
| 1992 W250 fuel leak | 14 Dec 2006 02:24 GMT | 4 |
I'm leaking fuel from above the heater element that sets above the fuel filter, has anyone removed this heater before. The only thing I see that holds it on is the shaft that the filter attaches to and it is slotted, I just don't want to torque on something if there is more to ...
|
| Average V-8 Weight? | 13 Dec 2006 19:02 GMT | 3 |
I am looking to buy an electric hoist for the shop and was wondering what the average weught of a V-8 was. They are rated 440lb / 880lb / 1 ton / etc. I don't think I have ever ran across the weight of an average long block. I would thinkk the 880lb would cover the engine alone ...
|
| Fuel Filter | 13 Dec 2006 16:44 GMT | 9 |
I recently found out my 2000 ram 1500 V6 has a fuel filter on the fuel pump in the fuel tank. A mechanic put it on the computer and the code came back that something was wrong in the fuel system that was making it shake, rattle and roll. He suggested I change the gas cap but that ...
|