| Thread | Last Post | Replies |
|
| OT? Redneck Church | 09 Feb 2007 12:07 GMT | 1 |
Redneck Church You Know Your Church Is A Redneck Church if... the finance committee refuses to provide funds for the purchase of a chandelier because none of the members knows how to play one.
|
| Most People Will Never Know About Biodiesel | 08 Feb 2007 22:51 GMT | 36 |
What kind of difference can the use biodiesel make when it comes to changing the world for the better? Perhaps the biggest impact of the use of biodiesel fuel instead of just plain diesel is on the human health and the environment.
|
| Horns | 08 Feb 2007 14:53 GMT | 17 |
Anybody have any thoughts on replacement horns. Not for a truck but a car. Both the horns on the magnum and the charger are weak. I'm looking for a plug in, not air. I've looked at Griot's, but would like more options. tia Roy
|
| DODGE DIESEL RECOMMENDATIONS REQUESTED FOR 2 WHEEL DRIVE... | 07 Feb 2007 19:56 GMT | 2 |
I am interested in buying a Dodge Ram Diesel, 2500 or 3500, single or dually, about 5 years old or so with a manual transmission. I understand there are 5 and 6 speed manuals. I would like a truck that is nice to drive on a long highway trip, but can also carry a nice
|
| Amazed! In a bad way. | 07 Feb 2007 15:39 GMT | 4 |
I bought a new 2006 Quad Cab Dodge Dakota ST 4X4 for $25,000 just this past September. It turns out that it doesn't fit my personality at all. It only has 4500 miles and is less than 6 months old and
|
| Microsoft Chokehold on OEMs in South Africa | 07 Feb 2007 15:09 GMT | 23 |
The hunt for a Linux PC ,----[ Quote ]
| Where can the average South African consumer get their hands on a | new PC loaded with Linux instead of Windows? Not a lot of places, |
| electric block coolant heater | 06 Feb 2007 22:23 GMT | 11 |
does anyone know if an electric coolant heater is available for the cummins diesel ? The type I'm referring to has an electrode like a household hot water heater that is placed into the cylinder block. By plugging in the heater the coolant is preheated to avoid cold starts
|
| 98 Ram flywheel rubbing | 06 Feb 2007 19:19 GMT | 1 |
Starting hearing a metal pinging noise under my Ram (5.2L, 4x4) when I would pull out and under load. Pulled starter and inspection plate off tranny. Found that the flywheel bolts are rubbing inspection plate. Saw the flywheel move towards block when truck was revved. Is ...
|
| C.O.L.A. Newcomer FAQ and Primer - Edition: 0.1.9-3 - 02/31/07 | 06 Feb 2007 15:24 GMT | 2 |
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + + + C.O.L.A. Newcomer FAQ and Primer + + Edition: 21 - 9/24/06 +
|
| 02 dakota wheel bearings | 06 Feb 2007 03:57 GMT | 2 |
i have an 02 dodge dakota with bad wheel bearings. i see that this is a non servicable hub. does anyone have the page of the manual of how to get this hub off and replaced? i see there looks to be two pins that are allens to take caliper off and what looks like one large nut
|
| 1997 Cummins info request | 05 Feb 2007 19:53 GMT | 1 |
Truck is a dually 3500, QC 4x4 with accident damage. Price might be good ($4500.00) and will know after I inspect it and get some estimates. What I'm looking for here is input on the older style versus the newer style Cummins and of course any issues with that particular truck I ...
|
| 98 Dakota, overrdrive question | 05 Feb 2007 17:48 GMT | 4 |
In the nine years I've owned my '98 Dakota, 3.9L 2WD, AT, I had never turned the OD off. Last week, while pulling a fairly light trailer in a hilly area I decided to turn it off (manual says to in order to cut down on the transmission hunting). When I turned it off, I noticed
|
| broken spark plugs | 04 Feb 2007 19:09 GMT | 1 |
hi my name is amy marie german i have a problem with my contour. you see the other day my check engine light came on and either the engine or transmition started to jump
|
| Truck topper 3rd brake light | 04 Feb 2007 17:28 GMT | 4 |
Sorry if this is a stupid question. I just got a 2003 2500 ram. It had a topper on it but the top is older and does not have the third brake light. I know I can buy one but where or how do you hook it up? I want to be able to take the top off
|
| question about changing the rings on a dodge 2500 , 5.9L magnum , 1998 | 04 Feb 2007 15:25 GMT | 17 |
i have to change the ring on my dodge 2500 5.9L magnum 2 wheel drive 1998 my question can it be change by the bottom throug the oil pan , or is it better or easyer to take out the engine and put it back . And if any one of you has tip or help for me , it will be greately
|