I run 80 PSI in my rear tires and the only problem I have had in over 60K
miles has been flats on both rear tires caused by valve stem problems.  Both
times I was told that it was caused by the stems not being High pressure
(these were OEM) ones and the ones they replaced them ...

Another way to apply caulking - alt.home.repair | Google
GroupsHelp | Sign
in
alt.home.repair

FIRST......flame if you will......
let YOUR soul.......YOUR moral....YOUR concience.....
be your hand......
now........

I have a 2004 Ram 1500 with the Hemi engine.  recently when it idles
below 750 rpms it stalls.  It only usually happends when I am slowing
down and have let off the gas.  I also have noticed that when sitting
stationary it idles at exactly 500 rpms.  This seems low and may

Hey everyone, just traded in my 2002 Dodge 1500 4x4 (5.9 gas) on a
brand new 2006 2500 4x4 Reg Cab SLT with the other 5.9:) It was
sitting on the dealers lot since March of 2006 so I was able to get a
good deal on it. (Seems like regular cabs are  not popular here in

Drop me a line if ya wouldn't mind.

http://support.forumgogo.com     More powerful than the phpbb
This is a great site that is completely free, and can make some cool
forums, here's an example of one, you can make your own topic, polls,
and replies etc, and you can have an accout for every member. This

I need to repair my dully rear fender, what is the name of what its made of,
its not fiber glass????

   Just picked up a cherry of an '88 Dodge Ram Wagon
(http://www.befumo.com/new_van.htm), which I have every intention of hanging
on to for the long haul.  While I have no plans to do anything immediately,
I was thinking I might just keep my eyes open for a good deal on a wreck

I just traded in my 2000 Dakota Sport for a 2007 Ram 1500 SLT. Very
VERY happy with the truck. Before I decided it was time to unload the
Dakota, the engine was making a noise during cold starts. I never
investigated it any further except I switched back to synthetic oil

I'm currently trying to change out the distributor on my '78 Dodge
D200.  The problem arises because my dad has jerry-rigged the hell out
of this truck.  It originally had a 360, but now it has a rebuilt
318.  The current distributor is electrical and the one I'm putting in

My car is Town and Country 2003, but I think it's either close too or
identical to a dodge van.
The question is that my power steering pump made noise, so I am
changing it.  However, I heard that I need to clean the oil filter for

I've noticed recently the floor knocking under my left foot while turning
around in my gravel driveway. (auto trans). Could it be tie rod end loose
or some other component, Gonna take it to an independant mechanic first
them if its much rush to dealer before warranty runs out in two ...

I have a 99 Dodge Dakota 4x4 with the 3.9 V6 and 44RE auto trans. w/
OD.  I purchased the truck with 51K miles on it.  At around 55K the
trans. developed an eratic shift from 2nd to 3rd.  It seems to me that
the shift starts too early and slips too long before going into 3rd.