| Thread | Last Post | Replies |
|
| 2004 Durgano Headlights Hang On Occassionally | 31 May 2007 21:01 GMT | 6 |
On a 2004 Durango every couple of weeks when I turn the headlights off the lights actually stay on. If I turn the switch back on and then off I hear a relay (or I think I do) and the lights go off. Is this typically a switch, a relay or some other really expensive component?
|
| 2001 dodge dakota | 31 May 2007 18:18 GMT | 5 |
I have a 2001 dodge dakota with a V8 engine. On my way to work today it started to over heat and spit radiator fluid. does anyone know what this could be???
|
| dixie horn for sale | 31 May 2007 17:52 GMT | 3 |
i have a dixie horn for sale if interested hit me up. its brand new and hasnt been opened.!!!!!
|
| New 2007 2500 SLT | 31 May 2007 13:26 GMT | 10 |
I have had three Dodge trucks so far, a 92 Dakota, a 02 RAM and a 04 RAM, none with diesel. Loved them all, but now we went a bought a bigger trailer so my wife and I just bought a new 07 RAM SLT quad cab 2500 with the 5.9 Cummins diesel
|
| Fuel Pressure, Rail Pressure Gauges | 31 May 2007 13:18 GMT | 11 |
Need a second opinion: I am having Pricol Optix gauges installed on my 2004 Ram, CTD in the next few weeks. I like the Optix gauges because they match the OEM dash. http://www.danininc.com/opticdetail22.html
|
| 98cummins specs | 30 May 2007 15:30 GMT | 2 |
Can anyone tell me the peak power and economy RPM points for a 98 12 valve Cummins? I have a feeling the best mileage happens around 1100, but would like to get some more input.
|
| Put a carb in a '91 Dakota? | 30 May 2007 13:20 GMT | 5 |
We bought an 87 Dakota when they first came out, and had to get a '91 with Club Cab when our son was born. Drove it for 240,000 miles and had a cracked block. Should have gotten a new engine, but bought an '03 Dakota that my wife now drives every day.
|
| torque splitter? | 30 May 2007 04:03 GMT | 21 |
wondering who offers what in regards to a torque splitter for my '05 cummins powered dodge? it would work out well if i could use stock gearing most of the time, and a torque splitter when towing heavy. thanks,
|
| Rickson 19.5" Wheels | 29 May 2007 23:59 GMT | 1 |
Is there anyone out there who has Rickson 19.5" wheels (an appropriately sized tires) installed on an '06 (or thereabouts) Ram 2500, diesel engine, single read tire, and 6-speed manual tranny? Any comments? Suggestions?
|
| truck differences | 29 May 2007 18:09 GMT | 11 |
i own an '04.5 3500 SRW cummins powered 4x4, as well as an '05 3500 DRW cummins powered 4x4. both can be seen at http://inlinediesel.com/trucks/3gen/1/index.html the '04.5 has the cummins 325/600 and the '05 has the 325/610. both are
|
| Ram 1500 | 29 May 2007 15:05 GMT | 7 |
I have a quad cab 1500 Ram. The registration says it's 7000 lbs. I have a 2 ton jack. I jacked the truck up at the front right wheel, which was flat. It took all of my strength to pump up the last few pumps. I was afraid it would fail, and it was creaking a lot. Will a 2 ton ...
|
| pulling HEAVY, now what? | 29 May 2007 03:48 GMT | 27 |
please see http://inlinediesel.com/forum/topic.asp?TOPIC_ID=617 and give me your feedback and advice. thanks,
|
| 99 Dodge Ram 3500-Leaking Oil From Blow By Vent Valve | 28 May 2007 23:09 GMT | 65 |
I have a 99 dodge ram 3500, and it has just started leaking oil from the blow by vent valve. Any ideas on what to do? Thank you! Melody
|
| 06 CTD | 28 May 2007 22:44 GMT | 2 |
I was wondering, when i put my key in the ignition and go to start it(waiting for the glow plugs) a engine light come on. Once its done with the glow plugs and testing its self the engine light then blinks several times and then stays on. When I start the truck the light goes
|
| 6 speed retrofit? | 28 May 2007 22:00 GMT | 3 |
can the new 6 speed automatic be retrofitted into an '05 5.9 cummins powered dodge? thanks,
|