| Thread | Last Post | Replies |
|
| Do you suppose with the fires in Utah.......... | 10 Jul 2007 16:33 GMT | 2 |
that Budd thinks he has died and gone to hell? beekeep
|
| Govenor on 01 dakota 4.7L?? | 10 Jul 2007 14:47 GMT | 12 |
I'm guess it's governed, at least I sort of hope so... Took a short road trip last week to the states and the truck "cut out" twice while passing other cars... Felt like an ignition stumble that went away as soon as you took your foot out of it...
|
| a/c vent temp variance | 10 Jul 2007 03:14 GMT | 42 |
2005 dodge ram 3500. my drivers side air vents blow cold, the passenger side vents blow hot. the difference is measured as high as 30 degrees after driving for 15 miles on the interstate. before i look at it im wondering if this is a common issue? without having looked at it ...
|
| Hanging hose | 09 Jul 2007 22:52 GMT | 5 |
1998 5.9L QC 4x4 Yesterday I noticed a hose hanging down from the back of my truck. It was hanging down on the driver's side from the frame rail just above the spare tire. It is about 18" in length, one end appeared to be clamped to something
|
| 2003 RAM 2500 Diesel towing do's and don'ts | 09 Jul 2007 22:51 GMT | 129 |
I just bought this truck..really impressed being a GM gas guzzler owner before. I am planning on towing a 5th wheel RV trailer and have a question on the proper use of the automatic transmission. I did not get a manual with the truck and haven't got one from the
|
| clicking.clunking from front end | 09 Jul 2007 19:33 GMT | 16 |
Help I've been getting a rather loud clicking/clunking from the front end of my 2001 Dodge Dakota sport 5.9L quad cab. Already the transfer case and the CV drive axles have been replaced and
|
| 2000 GMC Sierra | 09 Jul 2007 05:57 GMT | 3 |
I know this is a Dodge Site and i drive a Dodge Ram 3500 myself :) My friend has a 2000 GMC Sierra 1500. The exhaust is out problem, he has headers and Magnaflow exhaust. The Y pipe and the cats are our problem. Their are O2 Sensors before and after the cats. I was wondering if ...
|
| Tie Rod End Or More? | 07 Jul 2007 00:13 GMT | 6 |
Friends, 1996, Ram 1500, 5.9L, 4X4. With your help I replaced the passenger side hub bearing and still have a slight wobble in the 3 to 9 o'clock position. Tom suggested a
|
| Flywheel for '64 Dodge D100 Slant6 | 06 Jul 2007 12:27 GMT | 4 |
I have been having a hard time finding 10" flywheel for my 1964 Dodge with 225 Slant 6 / 3spd on tree for months without any luck. Yes, I know it's a SNAIL engine but hauled good load on longbed thanks to a massive 8 ¼ or ¾ / 3.91 gear axle.
|
| Dodge Ram 1500 - 2 or 4 wheel drive | 06 Jul 2007 05:15 GMT | 85 |
I am considering buying a Dodge Ram 1500 in the UK, as I want something big, intimidating and an expression of my manhood : ). I notice that most Rams advertised are 2 wheel drive models, the 4 wheel drive ones being relatively rare.
|
| Happy 4th | 05 Jul 2007 17:59 GMT | 6 |
Since no one else said it.
|
| Power supply failures!!!!!! | 05 Jul 2007 13:03 GMT | 32 |
man they just don't build them like they used to do they??? i mean shoot only 7 years out of this one case?? the power supply for my AMD 1100 went south, so i decided to buy a new power supply and case as the old case was short on a few features i wanted, mainly the front USB but to
|
| Airbag light on and no more Cruise Control? | 04 Jul 2007 17:24 GMT | 7 |
I have a 2001 Dodge Ram 2500 Cummins TD quad cab long bed and drove to Fairplay CO from Golden CO using the cruise control a week ago Friday. I stopped at a friend's house and when I left, the air bag light came on, intermittently at first, then it was on contstantly.
|
| Check Engine Light code 2002 Dodge Ram 4.7L V8 | 04 Jul 2007 15:33 GMT | 3 |
I have a 2002 Dodge Ram 4.7L V8 I did the on off on off on trick with the key in the ignition and got two codes for my check engine light P0442
|
| 6 speed high idle | 03 Jul 2007 22:51 GMT | 3 |
is their a way to enable the high idle through the cruse controls on a 07 5.9 ctd 6 speed ?
|