| Thread | Last Post | Replies |
|
| AC Staying On | 10 Aug 2007 02:31 GMT | 6 |
Seems that the AC in my 99 CTD Quad Sport is stays on once turned on and won't shut off from the heater controls. Anyone else have this problem and found the cure? TIA
|
| 2002 Ram 2500 Loss of Power | 10 Aug 2007 01:26 GMT | 6 |
Recently the power from my 2002 Diesel has become inconsistent. If the truck sits for a day or two, it take a mile or two before it feels normal as far as power. While driving this first mile or two, the engine just seems to lug. This is with no load in bed or trailer. This ...
|
| Headliner Problem | 09 Aug 2007 17:53 GMT | 9 |
'03 Dakota CC 60k miles, and the headliner's now starting to come unglued. It's dropping in the middle on the passenger side, and the front's coming down as well. Suggestions on how to fix?
|
| mileage | 09 Aug 2007 14:12 GMT | 6 |
I have 354000 on my diesel engine and it is running great. How long does a cummins usally last?
|
| Bad Diode Stator means? | 09 Aug 2007 04:27 GMT | 26 |
Sorry to keep bugging everyone about this, but I just don't know. 77 dodge van 318. On startup ammeter needle swings from full charge to midrange. Loud squealing when ammeter needle swings to full charge. Noise goes away after engine warms up. I think I tried
|
| Sensors | 08 Aug 2007 22:45 GMT | 1 |
Sorry to Keep asking stupid questions but can any body tell me what the difference is between the hall effect sensor and the cam position sensor is and where they are located on a 1999 ram 2500 with 5.9 gas engine
|
| 2000 ram 2500 | 08 Aug 2007 17:37 GMT | 6 |
My wife 2000 ram 4x4 with a 360. It will not start in wet weather. She has changed the cam sensor, cap and rotor, the crank position sensor was changed a year ago. I've suggested she try plugs and wires but she claims that they are good. Don't ask how she knows? Any ...
|
| Is my 2000 Caravan electrical haunted? | 08 Aug 2007 14:49 GMT | 3 |
OK, while driving my 2000 Caravan started doing something odd electrically... I heard a steady ticking sound coming from the steering column area in synch with the ticking the odometer and other dash lights blinked. This
|
| Generic oil seal installation tool vs. Dodge tool #6635 question | 08 Aug 2007 01:15 GMT | 3 |
I'm preparing to replace the timing chain on my '99 Dodge Ram 5.9 gas engine, which also means replacing the front crankshaft oil seal. I have a generic oil seal installation tool kit that looks like it will work, but the depth of the various size disks is only about 1/4 inch. ...
|
| Was there ever a 3-SU setup for the Slant Six? | 07 Aug 2007 02:36 GMT | 13 |
Did anyone ever build such a thing?
|
| Color codes alternator wires | 06 Aug 2007 02:17 GMT | 17 |
I posted this in rec.autos.tech and either they think their too smart to answer or they don't really know. Old dodge van, 70's vintage. Alternator wires from back view, two small gauge ones, one is green other red. Two terminals one at 11 oclock one
|
| P0455 code fixed, or not likely? | 05 Aug 2007 09:26 GMT | 27 |
Had my truck in for service today, as the muffler was rusted through and the rest of the system didn't look too good either. Since I had it in to an exhaust expert, I had them look for the cause of the P0455 code (Evaporative Emission Control System Leak Detected (no purge flow ...
|
| Any MA inspection techs here? PCM swap/VIN? | 05 Aug 2007 07:02 GMT | 18 |
Looking for info from anyone that does emission inspections i Massachusetts, especially if they have any experience with modde OBDII vehicles, or input from anyone that has been through an similar transmission/PCM OBDII swaps in Massachusetts
|
| where to buy old factory parts | 05 Aug 2007 00:52 GMT | 2 |
#2906630 It's a relay associated with gauge cluster on a 1971 D400 truck. Thanx
|
| Ebay Transmissions | 05 Aug 2007 00:01 GMT | 1 |
Anyone tried one? Looks like a good deal on the ATS set up for a 47RE John
|