Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / October 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Muffler question > Sound .15 Oct 2007 08:59 GMT12
Does anyone know of a good flowing muffler without all the noise ? I
want to install duals on my 97 Dakota ,3.9 engine but dont want the
bumble bee ,chainsaw sound . Thanks !
Long time dodge owner finally gives up on em!!!15 Oct 2007 03:30 GMT7
Been a dodge boy my whole life. the hemi is nice the truck rides smooth. but
interiors in the 2006 dodge ram are sh.t. you have to upgrade to the
expensive truck to get a decent seat (Leather) the mds works like sh.t and
the gas mileage gain doesn't exist. I know because i had ...
Help with disabling anyonce's15 Oct 2007 01:33 GMT5
I have a quad cab 2007 RAM LARAMIE 3500 6.7
This is what I would like to disable on it.
1. The stupid bell and light that comes on when the seatbelt is not in
use. I would like something better then a physical work around on the
lifetime warranty, not on diesels13 Oct 2007 02:53 GMT3
after a few commercials talking about the lifetime warranty on all chrysler
vehicles i decided that was the incentive i need to trade up.  i unloaded my
truck, cleaned it up, and headed to the dealer with the intention of buying
a 4x4 dually with the 6 speed manual.  when i got ...
1986dodgeram5012 Oct 2007 21:09 GMT1
I have a dodge ram 1986 5 speed. my truck was running great an hour
latter i went out to go somewhere and it would not start .It will turn
over and run if i hold the key on .I was told it was the voltage
regulater but i have replaced it.Any ideas to what the problem is
Tranny solved on 96 auto12 Oct 2007 17:17 GMT1
As you may or may not recall, some months back, even further back, I
posted about the tranny in my 96 2500 4x4 Cummins acting up. It was an
intermittent problem which tells me it's an electrical problem. Why?
When a mechanical thing breaks, it stays broken. Electrical components
BeeMovie12 Oct 2007 16:48 GMT4
Just saw them capture a guy in a bunny suit on NBC!
OT<<<Shutting this down.>>>11 Oct 2007 23:39 GMT6
Going to have to pack this up. Leaving sometime tomorrow night, so it is in
the box. The Comcast addy will no longer be any good, those that have the rr
addy, that will be the one in use in FL.
Please be gentle with the friggin' rabbit while I'm gone, should be back
Gas engine up close and personal11 Oct 2007 22:05 GMT3
http://www.liveleak.com/view?i=73e_1192001762
beekeep
Pintle hitch question11 Oct 2007 17:17 GMT9
Question is:
How do I select the correct drop down/up pintle adapter for my 2"
receiver?
Do I need to measure the trailer to be towed height from the ground when
2001 2500 shifter problem?10 Oct 2007 23:53 GMT1
Father in law just bought a 2001 2500 2WD with the 360 in it. It has
some miles on it but seems solid enough. He did ask me one question
about the shift lever though. He says that you have to hunt to find
Drive and then if your in drive and put it into neutral it doesn't go
OT<<< Ping Beekeep>>>>10 Oct 2007 15:53 GMT8
Heading south this weekend and Mon or Tues. Shutting this down Wed.
Everything quite??
Roy
1977 W150 Warlock Questions10 Oct 2007 05:57 GMT1
I am restoring a 1977 Warlock 4WD, and I am looking for urethane motor
and transmission mounts for a 360.  Any ideas where to find these?
Does anyone know if the factory FL brake line mounted to the axle is
the same on SWB and LWB?
skim key not programmed10 Oct 2007 04:17 GMT1
i have a dodge ram 2003 4.7L 4x4 i bought new computer but its giving p0633
code but i have a black key please send info anybody help
White Gas-smelling Smoke10 Oct 2007 01:34 GMT8
I have white gas-smelling smoke coming from the valve cover when I
remove the oil filler cap.  Could I be burning coolant and it just
smells like this because of the route it's taking or am I burning
coolant and something else is wrong?  I am getting a code 13 (MAP
Pages: 1 2 3 4 5 September, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.