recently while driving i started having a loud growl from from drivers side -
from experience i knew it was the wheel bearing-a trip to autozone -got hub
bearing assembly with abs sensor for about
$190 bucks.borrowed the axle nut tool-neat deal-no need to buy specialty

Hi, guys, I have a problem with my 1996 dodge ram 2500 with the cummins
diesel.  It started about 2 months ago and I have not been able to pinpoint
it.  It did happen about 3 yrs ago but only lasted 2 weeks and everything
worked good till 2 months ago.  It is an intermittent problem ...

I want to replace my front rotors on my 03 Dakota , it's a 4x4. Are they
pressed on or anything like that? Any special tools needed?
     Thanks
   Jimmy

Ram 2500 4WD CTD  160k miles
Recently brakes are grabbing, probably on only one wheel.  It seems to
pretty much go away after driving a while.
I believe these are anti-lock brakes.   Can the average brake shop work on

ok A buddy of mine just bought a 77 power wagon that was one of them
military 1 1/4 ton ones i think they were.. well anyway its got a 360
that was rebuilt anout 1000 miles ago it has an edelbrock manifold
with a holley 700 or 750 4 bbl carb... it just started smokin out the

Quick question:  What do you guys pay for a case (12 quarts) of standard
motor oil (e.g. 10W-30)?
Went to buy a case tonight.  Stopped at AutoZone.  They wanted $38.  Either
prices have gone way up, or I haven't paid attention the last few times I

Anyone know the color for the backup lights power, and is it accessible
from the trailer wiring plug - or at the light itself?

1997 Dakota 3.9L 5-speed, 170k miles.  Check Engine light came on
today.  I tried the on-off-on-off-on procedure numerous times and it
doesn't flash any codes.  I've done this before in the past and gotten
that to work, although I can't remember what the result was - but it

Some wanted to know how things turned out with my Ram rear differential
problems with excessive play at the pinion. It turned out to be just an
adjustment of the compression collar and tightening the retaining nut.
Basically, just adjusting the end-play. They also replaced the ...

I'm installing a UConnect add-on and am thinking about mounting the
mike and control pad to the overhead mini trip computer.  Anyone know
how to lower it down and/or remove it?  Clips somewhere or are there
screws hidden behind the lamps perhaps?

Ok my dodge ram leaks about a full radiator full of water in about 200
miles. I dont drive the truck much but anyways. The leak is from the
rear of the motor. With the engine running and me on the ground
drivers side, I see it coming from the very rear up high about the

I got a 98 ram 1500, I got no fire to coil how would I check crank sensor?
thanks
442
--

im comparing the two products.  i realize the juice will produce a little
more power but since i doubt i would ever max it out that part is
insignificant.  id really like to know how the two compare overall, which is
"better" for my application (towing 16,000 pounds), and which ...

in this thread
http://groups.google.com/group/alt.autos.dodge.trucks/browse_thread/thread/8644c
ef18ee3b198/bb1fbcced60a60c8?lnk=st&q=&rnum=1#bb1fbcced60a60c8
we discussed engine braking.  now that im making calls to persue it the
people are acting like they have never heard of ...

I had posted two previous notes concerning a problem with my 2002 Diesel
which had about 66,000 miles when the problem developed.  The last note was
on Aug 25.  Basically, the truck had no pulling power and could hardly move
itself.  Forget about towing.  The dealer finally ...