Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / October 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
4x4 Jaring Noise29 Oct 2008 10:35 GMT1
I have a 2000 Dodge Dakota that makes a jolting, clunking sound in
4wd. This happens in both low and high ranges. It only happens under a
load and has occured driving on the snow covered highway and on a dirt
fire road. The last time on the fire road it took about 1/2 a mile to
i want a refund27 Oct 2008 18:21 GMT3
well, after 291,000 miles the starter went out in my 97 ram.  i called the
dealer that i purchased it from and they said it was no longer in warranty.
now i am upset and had to change it out myself.  ;-)
i hope i get another 291k out of this one.  i bought a factory replacement
Dodge Ram Oil Pressure27 Oct 2008 15:00 GMT2
I have a 98' Ram truck with the 12 valve diesel engine. I have oil
pressure loss. When idleing it will go from 45lb. to zero for about 10
secounds and then back up. Durring driveing at times it will do the
same thing. Change oil a few times but stays the same. I turned up
Bleed trapped air from coolant system ?26 Oct 2008 18:30 GMT12
I did an oil change and backflushed the heater core today because it wasnt
too warm even when the engine had warmed up,and it helped the heater to blow
hotter than it was before,but now i can hear the water sloshing around
behind the dash when i rev up / accelerate. It sounds to ...
Build sheets online?26 Oct 2008 17:21 GMT2
I have a need for a build sheet for my 2001 Dodge Ram 1500. Is there a
online location to get this information?
Thanks
2000 Dakota 12v outlet fuses?24 Oct 2008 21:21 GMT4
Both of my dash 12v outlets stopped working. I looked in the fusebox under
the hood by the battery but could not see one marked for these. Is it
lurking somewhere that I don't know about? Or are there no fuses for those
outlets? As both stopped working,I guess they are fed via ...
GM and Chrysler merged already!23 Oct 2008 16:50 GMT2
This was parked at my local Dodge dealership.
http://tinyurl.com/63lfp7
Fuses22 Oct 2008 23:08 GMT3
I have a 2007 CTD 2500 and on the 7-way trailer plug the top right
"battery" prong has no power.  Does this have a seperate fuse and if
so where is it?
All the trailer light and brakes work but it will not re-charge the
Update on 46RE rebuild22 Oct 2008 00:07 GMT8
As some may remember, I posted a while ago about a friend's '00 Durango that
wasn't going in to lockup, and was overheating the transmission fluid (trans
temp light would come on after 10-15 minutes of driving...  that's about
260°F).  It then started slipping in multiple gears.  ...
1997 dodge dakota20 Oct 2008 00:49 GMT1
5 speed dodge ram, it lunges in going forward like im tapping on the
gas on and off, the check engine light is on. im told its a cam
sensor, but it doesn't seem to cut out in reverse. but lunges and
jerks while going forward. any idea what this could be?
1993 B250 Conversion Van19 Oct 2008 05:29 GMT8
Just purchased a 93 Ram 250 Conversion van. 318 Engine, 105K miles.
Two issues I see with it.
First, the engine runs great, plenty of power. Trans shifts perfeclty
smooth, but when it shifts up into OD, the van shakes, almost like it's
Thank you for Newsgroup info14 Oct 2008 23:01 GMT1
Thanks Guys for your input.
This is my first message from Google Groups. I have saved the list of
other groups.
Hail Damage - Recommendations (Dallas, TX)13 Oct 2008 16:32 GMT1
Folks,
My truck got some hail damage in the last storm (hood, roof and right
side).  Any of you have any suggestions or recommendations for paint-
less dent repair in the Dallas area?  This will be a cash transaction,
The bit OT: Getting Brake hose off continues12 Oct 2008 13:15 GMT5
Anyone know the size of the nut that is on the metal brake line that
connects it to the brake hose?
I have tried the SAE I have..none of them fit. Channel Lock pliers too big
to get a good grip, as well as Vice Grip style.
reprogramming a PCM at a tune up.11 Oct 2008 11:13 GMT2
He's a new one on me.  Having a problem with rough idle on my 04 dodge
grand caravan with a 3.8.  Check engine is showing briefly P303 which
is cyl 3 misfire.  Had the same problem 6 months ago and it was a bad
plug (or so I thought) on cyl 3.  Back then Dealer was great and
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.