| Thread | Last Post | Replies |
|
| Starting after long time storage | 10 Oct 2008 21:53 GMT | 2 |
My truck (Dodge 96 2500 Diesel) has been sitting in an outside parking lot for the last two years with no usage (long story). What suggestions do you guys have for putting this truck back into usage? I know that the batteries will be dead and there might be a flat tire
|
| Shopping For an Airplane GPS | 08 Oct 2008 23:46 GMT | 2 |
An airplane GPS is something that most pilots consider necessary… http://gadgetreviews.co.cc/Shopping_For_an_Airplane_GPS.htm
|
| exhaust question | 08 Oct 2008 09:12 GMT | 2 |
got an 08 ram 5.7. want to change muffler out with 40 series flowmaster. at the end of my exhaust theres a little mini muffler i was told its a resanator or resignator if replace the resanator with a straight pipe and add the muffler will it void out my warranty or trigger anything
|
| 2003 dakota headlight problem | 07 Oct 2008 21:00 GMT | 2 |
I have a 2003 dakota extended cab, air, auto, fog lights the left high & low beam do not light, fog lights ok, right side high & low ok tried good bulb, checked ground at socket with digital meter, appears
|
| Adding a remote to the factory alarm in a 2008 Dodge Ram | 06 Oct 2008 21:43 GMT | 1 |
I have a 2008 Dodge Ram with the factory alarm. I purchased a spare key/remote off Ebay and need help programming it to the factory alarm. I verified the FCC ID and Dodge part number before purchasing the spare remote. I do have 2 working remotes at this time. Do you have to ...
|
| 2007 or 2008 Service Manual | 06 Oct 2008 07:13 GMT | 3 |
I recently purchased a 2008 Dodge Ram with the 6.7 liter diesel and 68RFE transmission. I wanted to do a little research on the truck but can not find a Service Manual on line. I did find a nice posting for a 2004 but my engine and transmission first appeared in 2007. Does ...
|
| A bit OT: How can I get a brake hose off? | 05 Oct 2008 19:44 GMT | 8 |
Hi.. Got an '88 Suburban. Seems the driver side brake hose has gone bad and I am trying to get it off. There almost no space above or below the piece going into the frame to get a
|
| OFF TOPIC! -> new site dedicated to open carry | 04 Oct 2008 01:17 GMT | 259 |
although this is sure to surprise many of you, i am working on warming up to open carry. im not willing to sacrifice my tactical advantage of concealed carry, but im trying to warm up to the idea none-the-less. if you are already familiar with our sister site
|
| Anybody seen one of these? | 04 Oct 2008 01:01 GMT | 1 |
http://www.thinkgeek.com/gadgets/car/aa31/ It's a little 'puter thing you plug into your truck's OBDII port. Sounds interesting, wondering if anyone has one, or has seen something similar and can comment.
|
| Different newsgroup? | 03 Oct 2008 22:04 GMT | 6 |
This has been my favorite newsgroup for many years, along with the 49rs (?),Garmin, NCIS, Home repair, attws, and others. Comcast is discontinuing their newsgroup support and recommending Giganews,which is about $8.00 per month. I know you guys saved me almost $1500 with the
|
| mopar alarm system for 2008 Ram - part number? | 03 Oct 2008 20:24 GMT | 2 |
I keep calling the dealer here to see if they got the part number for the 2008 Ram factory alarm system but they don't. They say it can be up to a year before Dodge passes this info to them. Anyone know what the part number is? Is my dealer just giving me the
|
| Dakota 4.7 Vacuum Plumbing Question | 02 Oct 2008 22:46 GMT | 2 |
Pruchased a 2001 Club Cab 4X4 recently with the 4.7L engine. Noticed a port, I believe its on the base of the throttle body, metal nipple, has no cap or hose on it and is open. Heard a sucking sound coming from this port after shutting off the engine.
|
| Tire Size Question 2001 Dakota | 02 Oct 2008 05:29 GMT | 15 |
Purchased a 2001 Dakota Club Cab Sport with the 4.7L and AWD. It has 16 inch aluminum wheels with P265R70 tires. Speedo is under reading by about 10 per cent. Does anyone know if 16 inch wheels an option on these trucks? Any info
|
| Rocker arm torque specs | 01 Oct 2008 14:07 GMT | 25 |
Getting ready to replace the valve stem seal on my 360 and need to know what the torque specs are for the rocker arms. If anyone knows this little bit of info, I'd be very appreciative.
|