I have just bought a 06 Dakota and would like to have lights come on when it
starts. Is there a simple way to wire it?

I need to replace the ball joints on my '99 Ram 1500 4X4.  What size
pickle fork do I need to remove the tie rod ends from the steering
knuckle and the steering knuckle from the axle?  And, what brand or
kind of press to remove the ball joints while the axle is still on the

I have a 1999 Dodge Ram, 114,000 miles, 4x4 extended cab,
A few days ago I went out to start it and it would turn over fine, it
just wouldn't start. No gas was getting to the engine. I realized that
the fuel pump, which is in the gas tank, was not making that "noise"

I was driving my dodge caravan that is a 1994 and I turned it off and
it wouldnt start at all... When i pushed it and poped the clutch it
started, but when I got it home it didnt do any thing no noise at
all... I tried to jump it and it wouldnt do anything either... no

Friends,
    I have a 1996, Ram, 1500, SLT, 4X4, 5.9, with the snow plow/
towing group.  I do plow snow.  One of my front shocks blew.  I was
looking on Rock Auto and, as usual, I'm a bit comfused.  They talk

the '01.5 project is moving along pretty good (pics coming soon!).  i have
the wheels/tires on, the juice with attitude, and tonight i put on the banks
monster exhaust and the exhaust brake (plummed, controls not yet
installed...just put it on since i was doing the exhaust).

4x4, 2500, V8, NV4500
Can't seem to find the torque value for the flywheel...anyone
happen to know?

trying to install the tranny temp sensor where the instructions say to.
removed the plug but the hole behind the plug isnt deep enough.  it
penetrates through but the diameter is smaller.  i didnt realize this until
after stripping threads.  WTF??

I need an original Computer chip. Dealer screwed this one up causing
shifting problems. find me at ourbusiness2u.com

I have an 87 W100 pickup with a carb and would like to get fuel
injection.  I can get a 96 van with a 5.2 that runs great for next to
nothing.  How hard to change everything over?  Will the engine mate up
with my tranny/transfer case? or what's the chances of the new tranny

Still got the old girl. After investing so much a couple years ago to
replace both heads I really need to keep her.  Currently 99k miles. (don't
drive it much)
When cold (bearing in mind this is Houston, so we're not really talking

any idea if the 48re torque converter would work in a 47re?  i got my juice
with attitude today and im looking forward to installing it, but dont want
to kill my tranny.  also what valve body would you recommend for my tranny?
thanks,

are these still commercially available ready to bolt up or do i have to make
my own?
thanks,
Nathan In Montana

i am attempting to install a set of ride rite air bags in my 2001.5 ram 2500
4x4.  see http://img10.imageshack.us/img10/7926/55597713.jpg for a picture
of the bag sitting on top of the spring pack.  this is without the bracket
in place that would make it even higher.  this isnt ...

hey Folks:
I own a 1984 Dodge 150 Royal SE Power Wagon truck.  It has a 360, 4-barrel
carb.  Recently, I have noticed that on occasion when I hit a bump the radio
will flicker off then back on.  This intermittent annoyance has progressed