Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / June 2009

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Cummins TD burning oil at startup...30 Jun 2009 04:14 GMT19
   There appears to be a fair amount of knowledge here, so maybe someone
can help me out.  I have an 04 3500 with the 5.9 HO diesel.  It only has
about 30K miles on it as I only use it for hauling camper and towing boat.
But since my other car died, I'm driving it 40 miles each ...
1996 RAM outside temperature display problem in overhead console.28 Jun 2009 21:26 GMT6
I have a 1996 RAM 1500 Laramie SLT with the overhead console that show
temperature and direction.  The temperature readout says OC or maybe
0C and the US/Metric button doesn't seem to do anything now.  I
recently had a fender-bender where I read-ended a car at a light and
u joint28 Jun 2009 15:02 GMT7
can anyone help i am replacing a u joint on 1999 ram 1500 hundred i
have all the bolts out and caliper off but can not get the axle hub
out of the knuckle the one with the three bolts can someone help
Changing a hydraulic lifter on a 1988 Dodge 360 engine?21 Jun 2009 09:01 GMT4
I've got a 1988 Dodge P/U with 360 engine. It's my work truck I used for
hauling. One of the lifters has packed it in as of today. Do I have to pull
the intake manifold off to change the lifters on that engine?
Engine Maintence Light20 Jun 2009 20:06 GMT14
I have an 87 dodge w150 4x4, and this morning I went to start it, and
the battery was dead(I left the key on) Now that I have charged the
battery, the Engine Maintnence light is on....Wasn't on before the batt.
died, but now wont go off. Any Ideas? Thanks in advance
alternate reads in the dash display16 Jun 2009 15:56 GMT2
I love my new truck, 2009 1500 Ram Laramie. I was doing something with the steering wheel controls and noticed the readout on the dash, the message area, changed to show actual water temp etc...how did I do that? How do I repeat it for other info.
Thank
Signature

Joe

Yo16 Jun 2009 07:47 GMT52
f.ckers, just thought I would say a quick "hi" to the old farts in
here!
Larry
need info!!!14 Jun 2009 00:37 GMT9
Looking for a site that gives the msrp and the cost of each option.
tia
Differential work.  Recommendations?09 Jun 2009 23:19 GMT18
2001 QC 4x4 2500 V8 with 188,800 miles
Was changing the fluid in my rear differential today and noticed
a small chunk of material missing from one of the teeth in the driver
side axle shaft gear.  I haven't noticed any problems and for the time
New Dodge Trucks Half Price09 Jun 2009 21:12 GMT2
I saw an ad in the Dallas Morning News  - 2009 Rams half price.  Is
this something to do with dealerships closing on June 9, or a new bait-
and-switch?
Are folks in other parts of the country seeing these same ads?
Another clunk!06 Jun 2009 23:30 GMT16
OK, leaving for the flea market this AM...
About four miles from house, at 50 or so, get a rrriiiiiiittttt-clunk.
Stop and check, nothing obviouls. The rrriiiiiiiitttt sound is fast
(much faster than once per tire revolution). Once the clunk happens,
2000 CTD Belt Tensioner06 Jun 2009 00:34 GMT2
I have an annoying squeal on my 2000ctd (156K).  Does it pretty much
all the time, under load/idle, cold/hot, etc.  I'm suspecting belt
tensioner based on experiences with other vehicles.  Sound like a good
bet?  Haven't pulled the fsm yet to look, is it a pretty straight-
How to tell which model of transmission in '96 Van?05 Jun 2009 00:49 GMT7
I have a 1996 15-passenger Maxi Van (B3500 1-ton) with 5.9 gas engine
and automatic transmission.  How can I determine the model of the
transmission, in order to use the correct band-adjustment specs?
thanks!
Clunk!01 Jun 2009 12:16 GMT16
Gotta love old(ish) trucks (2001 Dodge Dakota, 4x4, 4.7l v8, manual)
Got driving after work, noticed immediately tht there was an odd clunk
when I'd depress the brake pedal.  No change in braking capability,
couldn't feel it, but could definitely *hear* it.  Went away after maybe
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.