| Thread | Last Post | Replies |
|
| 90' caravan sputtering | 24 May 2006 19:55 GMT | 1 |
It is a 3.3 litre and occasionally when driving it loses power spits and sputters, backfires through the air cleaner when trying to regain power. It never stalls and appears to run smoothly most of the time. If I feather the gas a bit or pull over for a minute it stops. It ...
|
| caliber | 23 May 2006 19:07 GMT | 1 |
I need some advice on a choice: I'm in east-coast canada and about to purchase a caliber or a caravan. 1) Caravan - My dealer is offering a base model mini van with $7000 off the price and under 4% financing
|
| 90 Caravan jerking only when accelerating | 22 May 2006 21:31 GMT | 3 |
My Caravan has now been doing this since Aug 2004 and I'm sure it will quit on me anytime. The first thing you think of when this jerking starts is that the front end is badly out of alignment or a wheel is loose. Not so. When I start
|
| converting to quad seats | 22 May 2006 19:15 GMT | 6 |
Is it possible to convert a grand caravan to be fitted with quard seats in the second row when it originally came with bench seats? simple question, I hope the answer or actual work is just as simple
|
| Dodge Dealer Boycott | 21 May 2006 07:12 GMT | 12 |
In effort to fight what we believe to be unfair sales and labor practices as well as stand up for Hispanic women's right to work in a company dominated by white males - Group 1 Automotive, Inc., we're organizing a boycott of the Group 1 Automotive, Inc. Dealerships.
|
| 2000 Plymouth Voyager-Changing the Shocks?? | 20 May 2006 04:00 GMT | 1 |
Anyone have any good tips for changing the shocks on the front of the mini van. The back shocks seem pretty simple but the front have that spring. danika@frontiernet.net
|
| anyone had many problems with the 03 SR2 (neon) | 19 May 2006 06:11 GMT | 5 |
|
| Reaching rear-side spark plugs by tip the whole v6 engine forward | 17 May 2006 18:53 GMT | 3 |
I am thinking about tipping the whole engine forward in order to have easy access to the spark plugs in rear. How do I do this on Caravan 97 ? What engine mounts should I release?
|
| Power Windows work/don't work sometimes | 16 May 2006 20:56 GMT | 2 |
My 95 Neon sport has two front power windows. Recently, sometimes they work, sometimes they don't work. A friend told me that it could be the problem with circuit breaker/positive temperature coefficient. But I don't know where the circuit breaker locates. Anyone who tell me the ...
|
| 97 dodge caravan not starting or stalling | 16 May 2006 00:49 GMT | 3 |
i am having trouble starting my 97 caravan. it also wants to stall sometime, while sitting at a light, and wont restart immediately. it acts as if its not getting fuel. it cranks over just fine, but will not fire. i cant really hear the fuel pump kick in, but i dont know that i ...
|
| BCM location, 94 Chrysler Sebring Conv.? | 15 May 2006 16:15 GMT | 4 |
Hey everyone, I'm trying to figure out the location of my Sebring's BCM; my mechanic tells me it needs to be replaced, but I'm a few states away and trying to locate the part via salvage yards. Chilton guide doesn't mention
|
| 1994 Caravan | 15 May 2006 15:40 GMT | 4 |
My Caravan's starter works intermittently. Sometimes when the key is turned nothing happens at all. I move the shifter in and out of Park to see if the button is not depressed which allows the starter to work but that does nothing whatsoever. Later, sometimes within seconds,
|
| Mission impossible or not? | 14 May 2006 17:41 GMT | 1 |
Is it possible to convert a grand caravan to be fitted with quard seats in the second row when it originally came with bench seats? simple question, I hope the answer or actual work is just as simple
|
| 1995 Plymouth Neon | 14 May 2006 11:10 GMT | 2 |
I have a 95 ply neon with a oil leak. It leaves a large puddle on the floor.It has oil on top of the transaxle and it also looks like it is leaking from the bell housing,this is a manual transaxle. I'am not sure if it is the head gasket or the rear main seal.Would a head gasket leak
|
| 99 Grand Caravan DIY Serpentine Belt Replacement | 13 May 2006 03:41 GMT | 5 |
Does anyone (hopefully Glenn Beasley reads this) have any suggestions on how to get enough slack to fully install a new serpentine belt? I've tried everything I can think of. I have a 15mm open end wrench on the tensioner with a 1/2 drive torque wrench in the box end. I'm ...
|