Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Cars / August 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
knocking noise in driver's front end04 Aug 2006 01:51 GMT1
When driving down hwys I get a knocking/banging noise in the front end
driver's side.  This only occurs after the car has been running for a
while.  I can take a 10-15 min drive and not hear anything, but after
awhile it will be really loud.  Already had the bushings replaced and ...
1997 Voyager Van Stalls then Starts03 Aug 2006 19:25 GMT8
My 1997 Plymouth Voyager Van (3.0 litre) will stall a couple times per day.
It can be at freeway speeds, or at idle.  Mechanics can not diagnose it
because it has to be driven for a while, and they just let it idle or drive
it around the block once or twice.
Automatic gearbox playing up03 Aug 2006 13:46 GMT15
Three years ago, a Chrysler garage replaced the automatic gearbox my
1992 Plymouth Voyager. It was the second time that the gearbox played
up, the first time another garage fixed it.  This time, it with the
same problem they decided that a new gearbox was needed   Even though
89 spirit brake problem03 Aug 2006 08:14 GMT1
I just put new calipers on my spirit and bled the lines. Everything seems
fine until I start the car, then the pedal goes right to the floor! I have
bled them several times and the master cylinder has been replaced to no
avail! Any ideas? Thanks: Dennis
Electrical problem02 Aug 2006 23:13 GMT9
I have a 94 dodge spirit, when I turn on the heater/ac blower motor the
wires going to the ignition switch heat up to the point it starts to smoke,
if I turn it off than the temp goes back to normal. What would cause this?
2000 Stratus A/C not cool02 Aug 2006 21:29 GMT6
Recieved car after my father died in 2004 with 30k.  A/C cooled ok for
the first summer, but I really didn't drive it much, so I'm not sure if
it was better then (2nd car).  Last summer a/c was poor, checked
pressures and they  were ok both high and low.  Took a shot at
crankshaft sensor on 1997 chysler LHS02 Aug 2006 13:03 GMT8
Where is the crank position sensor located on a 1997  Chysler LHS with
a 3.5 liter engine. My car has been jerking, spitting , and having duck
since Sunday afternoon. I recieve a code 11 when I did the self test
using the ign. switch. I change the cam sensor on today and it seemed
2000 2.4l timing belt02 Aug 2006 02:18 GMT3
replacing the belt and need to know the crank and cam alignment indicators!
Posted with NewzToolz. Free RAR, PAR, and yEnc decoders.
Get your free copy at www.techsono.com.
5 speed transmision in 1993 plymouth grand voyager01 Aug 2006 21:36 GMT3
I want to put a 5 speed transmission in my 93 plymouth grand
voyager. It has 3.3 liter V6. I think they made one year with the
5 speed and it was 1990. What would I have to do to make this
happen
Fuel tank door cable01 Aug 2006 17:20 GMT5
Howdy all.......:-)
My Haynes doesn't appear to provide information on how to fix a faulty fuel
tank door cable on my '91 six cylinder Voyager van.  Release mechanism is
located at the bottom, left hand side, of the drivers seat.  The wire
2006 Charger trunk lid rubbing of back bumper01 Aug 2006 13:20 GMT1
I have a 2006 Charger and noticed a wear line startting on back bumber.  T\i
spoke to the dealer where I bought the car told me over the phone they would
adjust the trunk lid and touch up the paint.  Not real happy about touch up
paint, I spoke to another dealer about the problem ...
Neon Air Filter01 Aug 2006 02:06 GMT2
Have a 98 Plymouth Neon and am trying to change the air filter. I can't
seem to get the clips on the housing to remove. I don't want to force
them, but I can't get them to budge. Any tips would be appreciated.
Thanks
Pages: 1 2 3 4 5 6 July, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.