Big starting problems . . . fine when warm / hot but a pig when cold.
Fiat dealer says stepper motor gone and wants well over £200 (GBP) on
top of the diagnostic fee to replace!  Car wouldn't fetch that price.
Anyone know what this bit is, where it is and where one might be found

Hi I have an 86 Audi 80 (1800cc) recently I changed the upper suspension
mount (and integral bearing) as I thought it was the cause of an
intermittent clunk heard when I turn the front wheels. However it was not
the fault as the sound is still there.  At the same time I replaced the ...

I?ve had power steering problems for some time, where the power
steering cuts out intermittently. I took it into the Fiat garage who
could not find what the problem was and suggested I waited until it
went totally.

PININ SPYDER2000 RUNS GREAT CONVERTIBLE  COUPE  LEATHER SEATS IN PERFECT
SHAPE,BRAND NEW GOODYEAR TIRES  ORIGINAL RIMS THAT ARE IN IMMACULATE
SHAPE PRICE IS ONLY $1,000
CASH ONLY NO MAJOR DENTS RUNS GREAT

I woud appreciate some advice- I am getting an intermittent problem whereby
there is a delay in the car accelerating after I have depressed the
accelerator/gas pedal. Could it be an fuel injection problem? How could I
diagnose this further

hi anyone got a Grundig MCD-36 for sale in the uk looking for one for my
marea
                               thanx    mark

I have a Tempra 1.6 I.E.cat of 1991 and went to the garage for the MoT test.
Now I have him back and idle rpm went to 1500 RPM instead of 900 RPM. There
seems to be no idle alignment.
I did disconnected my battery, but this didn't helped. Also my exhaust is

I'm converting a Fiat 128 engine into a hovercraft thrust engine.  I
have two wires from the distributor, green and brown.  Can someone
tell me where they go?  Thanks!
Doug

Apologies for the repeat query, just hoping someone can assist.
How does the temperature control work. I have two dials, one graduated
in what appears to be degrees C and the other which seems to control
the fan.  The "auto" position seems to control the fans operation in

I have a Fiat Tipo 1.4ie L reg (1994). The problem is that the rims of the
steel wheels are beginning to corrode and every so often I get a slow air
leak. Costs ?7 each time to have 'em resealed - apart from the problem of
having to check pressures daily. Anyone know how much new ...

Is it difficult to change a head gasket on a Cinquecento? I know how to do
it on a Mini, but surely a Cinquecento is more difficult? What problems will
I encounter should I try it myself? Does anyone have a link to a description
of the proces?

The brakes on my fiat uno 1.7 diesel(N reg/1996) failed today. On checking
inside the bonnet, i found oil leaking from a piece of machinary bolted to
the right hand side of the engine. A pipe comes from this to the brake
servo.  Someone told me that this was what had proberly failed ...

I own an '81 Fiat X 1/9, and I was having difficulties to find some parts
that my car needs. Actually what it needs are master and slave clutch
cylinders. My garage suggested me to send those parts to be re-made
somewhere, expecting a nearly 150 euros charge, only for parts.

We are looking at renting a scudo for a couple of weeks while on
vacation.  I have had a terrible time finding out a description /
details of the Scudo.  We are from America where there is no Scudo.
We want to go camping and hoping that the Scudo is a good camper so to

I am interested in buying a small roadster, either Mazda Mx-5 or Fiat
Barchetta.
Barchetta seems to be cheaper so for the same amount of money I can get 3 to
5 years newer Barchetta than a MX-5 Miata.