| Thread | Last Post | Replies |
|
| HELP! 1993 explorer won't start | 30 Sep 2004 16:23 GMT | 2 |
93 explorer, manual transmission. I turn the key and and all that happens is one click. I replaced the 7 year old battery, then the starter relay located on the fender by the battery, and then the starter. Still won't start unless I get friends to push me. Anyone have an idea ...
|
| 94 ford explorer HELP | 30 Sep 2004 16:12 GMT | 3 |
my explorer wouldn't start after i changer my plugs and wires so i bought a fuel filter it ran for a day then died again i replaced the fuel pump, fuel pump relay and know it will start then when i shut it off and try to start it again it wont start i let it sit for about 15mins and ...
|
| Water Leak | 30 Sep 2004 14:00 GMT | 7 |
I have a 1992 2 door Ford Explorer. I have a water leak that also contains anti-freeze mixed with the water which is leaking from which looks like a hose that is comes out of the back firewall into the engine compartment under the evaporator case. There is
|
| 2005 Explorer | 30 Sep 2004 06:07 GMT | 6 |
I read in the paper advance trac and stability control are gonna be standard on 05 explorers. Might wanna consider this if you are looking at an old 04.
|
| 2002 Explorer radio pinout | 30 Sep 2004 05:58 GMT | 3 |
I am a new Explorer owner, and am trying to hook up the audio output from a portable DVD player to my factory radio. I would like to use the CD changer input, but don't know the pinout. Does anyone know the CD changer pinout, or even better, can I buy a
|
| need radio faceplate or membrane 99 exp radio | 30 Sep 2004 05:58 GMT | 1 |
i need the radio faceplate or white rubber membrane from cd/cassette/am/fm radio from 1999 this is single cd version.junked radio ok too ,buttons are starting to fail because rubber is punched thru,someone gotta have one on this newsgroup,please help send e mail , rich
|
| Auto Locks not working | 30 Sep 2004 00:51 GMT | 4 |
Anyone had this problem before. My 1998 Explorer EB used to locks the doors automatically once I engaged drive gear. Does anyone experienced this problem and what the fix was? Thank you in advance
|
| Nitrogen in Tires? | 29 Sep 2004 17:47 GMT | 31 |
Not sure I read the whole sign, but as a friend was driving me past Costco I saw a sign by the tire area which suggested tires purchased there were filled with Nitrogen. Has anyone here heard of this concept?
|
| Airbag Light / Wire Harness | 29 Sep 2004 14:29 GMT | 2 |
I have a 2000 Explorer Sport 4x2 and the airbag light is coming on intermittently. I took it in to the dealer today and they said that it's a resistance problem with the airbag wire harness. Cost to replace - over $250.
|
| Temporary power steering failure..... | 28 Sep 2004 08:21 GMT | 4 |
I was backing out of my driveway the other day and discovered my power steering was not working........... I drove to a service station (to get some air for my tires), shut the car off and when I restarted it the power steering was back!!
|
| 92 Goes Clunk From Drive to Reverse | 28 Sep 2004 02:12 GMT | 1 |
My '92 EB goes "clunk" when shifting from Drive to Reverse and vice versa. I had the U-Joints replaced by Ford recently (when I got a new/rebuilt trans). I have looked underneath and cannot find anything loose or any obviously worn bushings on the suspension. Anyone else have this ...
|
| Spark plug gapping question | 28 Sep 2004 02:09 GMT | 6 |
I'm trying to help my brother put new plugs and wires in his 1992 Explorer XLT, and for the life of me I cant find the manual or any info on the net on how much to gap the new spark plugs. If anyone can help me with this it will be much appreciated
|
| 2004 Mountaineer squeek? | 27 Sep 2004 17:58 GMT | 1 |
Curious to note if anyone else has the same problem and/or should I get it looked at now or at the next oil change. When the AC is on, my 2004 Mountaineer V8 will squeek about once every 1 - 2 minutes. Another way to describe it is as a short whistle, like a
|
| belts replacing ??'s | 27 Sep 2004 16:10 GMT | 1 |
I know - this is dumb...tomorrow I have to replace my 3 belts ('82 F-100 inline 6 (4.9) w/power steering, a/c, 4 speed....should I buy a big set of pliers, or can I just use sockets and a prybar? any help appreciated!! Thanks...paulmbedard@earthlink.net
|
| Leather Care | 27 Sep 2004 14:54 GMT | 3 |
Who makes the best leather conditioner/restorer? Thanks
|