| Thread | Last Post | Replies |
|
| 98XLT A/C Max | 16 Oct 2004 04:20 GMT | 7 |
I've read the problems some people have with the blend door - not sure if that's my problem - advice required! On my '98 XLT if I select A/C max it happily blows nice cold air at me from the dash vents for a few minutes, then it seems to redirect the air to the
|
| '94 Explorer Thermostat? | 16 Oct 2004 02:56 GMT | 5 |
I have a 1994 Explorer. The temperature gauge reads in the low range (normal) while the engine is warming up and the vents are blowing hot air after a few minutes. As the engine runs for awhile either idling or driving the air coming from the vents cools down and the temp gauge ...
|
| 96 Explorer won't start Occasionally! | 15 Oct 2004 15:29 GMT | 4 |
I have an odd problem where my explorer will not start every so often. For example, it will not even turnover. Feels like no fuel is pushing through. We then wait awhile and it starts fine and doesn't happen again for awhile. But the last 2 days it has done it on my wife and the ...
|
| ABS Problems on '93 Sport 4X4 | 15 Oct 2004 11:37 GMT | 1 |
Greetings all. Just got back home (WA) after 4 months at sea and suddenly my ABS light stays on. Stomped on brakes to verify not working. Definitely not working as all four locked up. Fluid is fine, brakes have less than 10k miles and work great (Normal power assist mode). Fuses are ...
|
| 99 Explorer Thermostat | 15 Oct 2004 05:55 GMT | 1 |
Can someone walk me through how to replace the thermostat on my 99 Ford Explorer?
|
| Transmission fluid loss update. 1994 EB | 15 Oct 2004 05:26 GMT | 6 |
My 1994 EB 160,000 miles, spewed out all the transmission fluid., I had the vehicle recovered to my local wrench. He refilled 5 quarts of fluid, let the vehicle sit for two hours with the ac on, could not get the transmission to discharge.
|
| 1997 Ford Explorer V6 SOHC | 15 Oct 2004 01:44 GMT | 4 |
We have a problem with our 1997 Ford Explorer. The oil gauge suddenly drops to zero pressure when we make a right had turn, and the check gauge light comes on. When I straighten the vehicle out it goes back to normal. There is no problem with it when I start it or when it is ...
|
| 97 Explorer | 14 Oct 2004 03:21 GMT | 2 |
My Explorer does not like to warm up in the mornings. It will not idle for a long enough time, it accelerates to a high speed and then dies during its warm up. What if anything is causing this? And how could I fix it?
|
| air conditioner doesn't work | 14 Oct 2004 02:45 GMT | 4 |
As soon as I turn the switch to any position all I get is hot air.Even when the temp. is turned all the way off.It's almost winter now so it's not to big of a deal but I'd like to get it fixed.
|
| Success! Fixed my CD changer | 13 Oct 2004 14:02 GMT | 3 |
This is my 2002 Explorer 4-door with the OEM 6-CD changer. Ford sent out a postcard warning owners not to insert homemade CDs with paper labels. I forgot to tell my son, he inserted a CD with a crappy paper label, and sure enough, it jammed. "CD ERROR" is a message I grew
|
| 97 Ford Explorer Sport | 13 Oct 2004 12:21 GMT | 2 |
I have a rattling noise in my car, I took it to get it checked out and they said it was the catalytic converter, and that I needed to replace it. How accurate is this diagnosis? And what else if anything could be rattling?
|
| 97 explorer door locks | 13 Oct 2004 03:58 GMT | 2 |
my doors keep power locking. over and over again the only way i can stop it is to unhook the battery. i have tried pulling both the power lock and security system fuses. but it keeps going. HELP!!
|
| Odometer on 1995 Explorer is stuck... | 12 Oct 2004 23:34 GMT | 7 |
Does anyone know how to fix / or have any suggestions on how to fix an odometer on a 1995 Ford explorer XLT. It stuck at around 118,500 miles, I've driven around 3,000 miles and the odometer is now at 119,000 miles.
|
| Heater Wiring Diagrams for 97 Explorer | 11 Oct 2004 19:36 GMT | 1 |
Hi, My heater runs only on HI. Need wiring diagrams, likely resistor connected to switch is broken. Where is it? Thanks,
|
| 97 explorer hub problems | 11 Oct 2004 16:25 GMT | 2 |
I went to get my front end aligned and they wouldn't do it because my wheel bearing was bad.He gave me a price on changing the bearing.I decided to do it myself and when I called for the part they said I had to change the whole hub a.s.Is this true?Does anyone have a pic. of the hub ...
|