| Thread | Last Post | Replies |
|
| Coolant Leak! Help! This thing is killing me! | 04 Oct 2004 18:36 GMT | 6 |
I replied to the person with the "Water Leak" topic becuase my problem is
almost the same but not sure...
Ok. My 91 Explorer has been in and out of shop all summer long due to
over heating. Ive had the radiator, fan clutch, water pump, thermostat
|
| Manual to automatic door windows? | 04 Oct 2004 18:34 GMT | 5 |
For a 1991 4-dr Explorer: Can doors that require the windows be manually
raised and lowered be changed to power-operated windows? Possibly by
exchanging parts with a salvaged Explorer?
|
| Stop Leak for Power Steering? | 04 Oct 2004 18:03 GMT | 2 |
I have a rather bad power steering leak on my '91 XLT. It is not the hoses
so I suppose it has to be leaking where it connects to the steering U-Joint.
Anyone know if this seal is easy/difficult to replace? Would I be better
off getting a rebuilt power steering gear?
|
| Ignition coil testing / misfire | 04 Oct 2004 04:51 GMT | 13 |
1996 V6 Sport explorer, 219K miles, no engine work yet.
Been getting a misfire code on cylinder 6.
Got spark plugs changed at dealer. Changed the wires myself. (Both long
overdue). Noticed that some of the old plugs were showing 'lean' white-ish
|
| Car Care and Auto Body Repair Videos. $50.00 for all 7 video's | 03 Oct 2004 18:17 GMT | 1 |
Auto Body Repair video by Bondo & Mar-Hyde
Car Care Seminar: Auto Body Repair Video
Car Care Seminar: Engine Tune-Up video
Car Care Seminar: General Vehicle Maintenance video, still shrink wrapped
|
| '02 Explorer 4 dr - how to remove radio | 03 Oct 2004 15:31 GMT | 5 |
This is the factory-installed 6-cd changer. How do I get it out of the
dash? It does NOT have the two pairs of holes that accept the DIN
removal tools. In fact, it does not have any openings anywhere.
I figure I have to remove either the faceplate of the radio (which
|
| Have I chosen a bad dealership? | 02 Oct 2004 16:54 GMT | 2 |
I posted a while ago about a rough idle problem. I took it into the
dealership. They recommended, being almost at 49,500 miles, to do a complete
fuel system service (including de-carbing and fuel injector flush). So, I
had that done, as well as having my fuel filter changed and ...
|
| cadillac converter plate loose need help | 02 Oct 2004 02:46 GMT | 4 |
i went to the dealership to see what the noise was when i turned on my car
and they said that my cadillac converter plate was loose and it needed to
be tighten i was just wondering where this thing was located so i could do
it my self does anyone know where it is located and which ...
|
| 1992 eddie bauer oil pressure problem | 01 Oct 2004 17:24 GMT | 4 |
1992 40,000 miles on motor .The oil pressure gauge shows it losses pressure
as you drive it.Starting to hear a tapping in lifters...
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread