Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Explorer / November 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
rough idling07 Nov 2004 14:46 GMT5
I have a 2000 V8 Explorer.  All of a sudden today, the 'check engine light'
came on and it is idling rough.  I have also noticed a decrease in
acceleration and there is a gassy/oil smell when I get out of the car.
Any ideas as to what is wrong.  It only has 60k miles.
Carpet template for Explorer?07 Nov 2004 02:13 GMT4
Does anyone know where I can find a template, or the measurements, for the
carpet in the cargo area of a 1991 - 1994 Explorer?  The template may even
be the same for later models.  There aren't any Explorers in the salvage
yards around here.
Crankshaft Pulley Removal '92 4.006 Nov 2004 22:43 GMT11
So, how do I remove the crankshaft pulley from my 4.0 '92?  How do I keep
the pulley from turning while trying to remove the screw?  Is the screw
standard thread (counterclockwise to remove)?
I modified a strap wrench to hold the pulley but I'm afraid of snapping off
97 5.0 cats06 Nov 2004 21:55 GMT2
There are 4 cats on my explorer 5.0 and I was wondering if i took them off
for some reason, would the computer be all messed up.
Those go-roundy-roundy things in the front (4WD)06 Nov 2004 17:13 GMT11
I've heard them called "front U-joints" and I've heard them called
"Constant Velocity (CV) joints".  Which is the proper term?
I know in FWD vehicles they're called CV joints, but I don't know why;
it seems to me their velocity should change as the vehicle speed
Restore color to Exterior black trim?06 Nov 2004 05:44 GMT8
Is it possible to restore the black color to exterior trim after it begins
to become chalky and gray?
fuel pump re-set05 Nov 2004 19:41 GMT1
Blow a fuse for fuel on 95 explorer ,need help finding re-set button.
1994 explorer stereo-cd04 Nov 2004 23:09 GMT2
Bought  a 1994 explorer at an acution. It has a am-fm-single disc cd player.
The unit doesn't seem to have power. Checked fuses, they looked good. Is
there a code to enter, if so how do I obtain it. Thanks
Does Ford in the US.....04 Nov 2004 14:02 GMT7
Just wondering if Ford in the US has a model similar to this?
http://www.ford.com.au/territory/
If they don't, I'm wondering how well something like this would go in the
North American market?
Looking for directions to service front hubs (1994 4x4)03 Nov 2004 17:50 GMT2
It has been determined that my front left hub is not engaging, so I'm not
getting power to the front wheels in 4 wheel drive.
Quick check - since my front axle is not a limited-slip axle, does it make
sense that as the front left hub isn't engaging (but the driveshaft is
Washboard effect?03 Nov 2004 14:55 GMT5
I'm pretty new to this newsgroup and I saw a previous post about something
about a washboard effect. It was for the 2002-2004 model year transmissions.
I was wondering what the washboard effect is, could someone explain it to
me. I too have a 2003 explorer 4.0 V6, so I was ...
shocks/struts02 Nov 2004 07:38 GMT10
Just had my 97 Explorer XLT (135k miles) in the shop and they told me I
needed
new struts on the front and new shocks on the rear.  What is the difference
between
91 Explorer in Ottawa: is it worth anything02 Nov 2004 07:16 GMT16
It's time to finally move on from my 1991 Explorer.  I'm trying to
separate its value from the price of a replacement (no "I'll give you
$5000 for your trade-in but you have to pay retail for the new
vehicle").  What, if anything, should I expect as a reasonable
'98, Factory Radio Replacement02 Nov 2004 01:03 GMT2
I recently, replaced the factory radio with a Kenwood Excelon, something
(###'s).  I know that the new head unit has dimmer capabilities when the
lights come on, however, I don't know which wire from the factory harness is
for this.  There are two wire harnesses for the factory ...
Pages: 1 2 3 4 5 6 October, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.