I just got a new '05 Ford Explorer XLS and I was disappointed to find
out there is only one 12V power outlet in the whole truck. I need at
least two outlets one for my radar detector and the 2nd would be used
intermittently for various other uses including a cell phone charger or ...

I have a 1984 Ford E-150.  The start position on the ignition switch will
not operate the starter.  I have been starting the van by connecting a
wire from one of the small terminals on the starter relay to the positive
terminal on the battery. Could this problem be associated with a ...

I NEED ADVICE.. I RAN A TEST ON MY 2000 FORD EXPLORER. IT STATED " SYSTEM
ADAPTIVE FUEL TOO LEAN (BANK ONE AND BANK TWO)" I WANT TO KNOW WHAT COULD
BE THE PROBLEM.. THE TRUCK RUNS FINE BUT IT SOUNDS ROUGH.. I AM THINKING
ABOUT TAKING IT IN FOR ANOTHER TEST, BUT I THINK A DEALER ...

I AM WONDERING I HAVE GOTTEN DIFFERENT ANSWERS. THE FIRST ANSWER I GOT WAS
THAT YOU CAN NOT REPLACE THE BEARINGS YOU HAVE TO REPLACE THE HUB UNIT
BECAUSE THEY ARE SEALED.
THE 2ND IS YES YOU CAN REPLACE THE BEARINGS ALONE PLEASE WHICH IS

I have a 99 Merc Mountaineer (Ford Explorer). The truck has 42k miles.
It was making a loud humming front end noise, which was the result of
a bad front wheel bearing and the other front bearing going bad. I had
them replaced and the problem is solved, although an $800 job.

Have a problem with my 97 Explorer, v6.
Check engine light keeps coming on, scan
tool says air flow restriction, egr system.
I replaced the egr valve and it still comes

I OWN A 2000 FORD EXPLORER. IT RUNS GREAT BUT IT SOUNDS ROUGH.. IT KNOCKS
BUT NOT TOO LOUD.. THE HEADS WERE CHANGED ABOUT THREE MONTHS AGO. IT WAS
DOING FINE BUT, WHEN I RAN A TEST A FEW DAYS AGO, IT READ " SYSTEM
ADAPTIVE FUEL TOO LEAN (BANK ONE AND BANK TWO)" WHAT COULD BE THE ...

I'm looking for the IAC on this SUV and I see three devices, can someone
help me identify the idle air control valve?
tnx
Hank

MY CHECK GAUGE LIGHT CAME ON AND THE TEMPATURE ARROW IS IN THE RED,
BUT THE COOLANT LEVEL IS FULL. WHAT ELSE COULD BE CAUSING THIS AND IS
IT EASY TO DO YOURSELF? IT IS A 99 FORD EXPLORER XLT

I've been reading a lot of articles lately about using magnets together with
the oil filter to trap metalic micro-shavings.  One version was a flexible
wrap that went on the outside of the filter, another version looked like a
capsule that was dropped into the input opening of ...

4l v6 75,000kl. the motor is playing piano at accélération.???????? Merci
Pierre

Is it possible to re-tighten the drivebelt tensioner in a 1991 Explorer or,
will I need a new apparatus? It seems that the pulley is rubbing against the
tensioner itself. In particular the part that juts out and accepts the bolt
that holds the pulley. ( I hope someone understands ...

While I was driving up a steep dirt hill in 4WD my '92 EB lost power.  The
temp gauge was about 2/3 the way up.  It just would not go any more.  It did
not feel like the transmission was slipping and the tach was reading around
2500-3000 rpm or so.  I shut off the engine to let it ...

When I started my 1998 Explorer XLT last night a squeal started up as
well.
Ok, I guessed the fan/accessory/serpentine belt (what are they called
these days?) is loose, also confirmed as my "volts" gauge was

I've had this vehicle since June of last year. I've been very pleased
with it so far.
It's recently developed a strong engine vibration that occurs during
idle (park, drive or neutral). If (while in park/neutral) I blip the