| Thread | Last Post | Replies |
|
| 98 Explorer sohc 4.0 timing fix | 12 Jun 2006 22:29 GMT | 12 |
Hello. I have been searching the web for weeks looking for information on the timing chain and intake manifold fixes on these 4.0's. I have had the truck since it had 98,000 miles on it, it now has 150,000. It had a light rattle at startup and has always had a small
|
| 98 Explorer Alarm | 12 Jun 2006 21:26 GMT | 5 |
The alarm on my 98 Ecplorer intermittantly goes off. Can anyone tell me where all the sensors are and if there is any way to find out which one is setting the alarm off. Thanks
|
| Transmission contamination | 11 Jun 2006 23:40 GMT | 3 |
Can any one tell me what can cause contamination of you transmission
|
| QUestion on rearview mirror replacement | 11 Jun 2006 15:50 GMT | 10 |
The rear view mirror on my 92 XLT just fell off (79,000 miles on the truck and it's still like new - except for the mirror). I've checked all the old posts and the former Singleton site and don't see anything on this particular issue:
|
| Dang Fords | 09 Jun 2006 21:06 GMT | 3 |
Just replaced pow'r steering gear box, pump is now shot. Have a new leak, heavy, below the tran fluid check stick. Looks to be tranny fluid but pretty dark. Can anyone tell me my next nightmare?
|
| Air Bag Code 19 Flashing on cluster | 09 Jun 2006 14:50 GMT | 1 |
Hi, I own a 2002 XLT 4.0 explorer, 4x4 auto. and there is a code flashing from the air bag light in the cluster, CODE 19. please if anyone can help I would appriciate. Thanks...
|
| 02 Brake light switch revised? | 09 Jun 2006 12:56 GMT | 2 |
Can someone verify that the correct Ford replacement brake light switch is 4L2Z-13480-AB? 2002 4x4 4.0 BTW. The reason I ask is the new one looks completely different than the original, having a lot of metal construction and a different electrical connector. There is a pigtail
|
| 93 Explorer running sluggest | 09 Jun 2006 01:15 GMT | 4 |
My 93 Explorer is running sluggest. It runs like it is not getting enough gas, when I'm on the road the rpm will first go up to about 2 1/2 to 3 then it drops making it feels like it's barely pulling It started after I had the fuel pump replace. A week later I change the inline ...
|
| Had Transmission Rebuilt now i'm | 08 Jun 2006 20:15 GMT | 1 |
getting a squeaking or chirping sound coming from near the bell housing. it's been 2 months since rebuiuld but i noticed it about a week after and thought it was a water pump or something. i used a stethoscope on all the parts with pulleys etc until i realized was
|
| Explorer lug wrench | 08 Jun 2006 20:12 GMT | 3 |
I snapped off my lug wrench at the flat that has the square punch-out that serves as the jack crank handle. Anyone know of a replacement source short of eBay, Ford, and a wrecking yard? The one I broke is pretty cheap-charlie and I'd like to replace it with something better
|
| 2001 Ford Explorer that idles erratically | 06 Jun 2006 02:11 GMT | 1 |
I have a 01 Ford Explorer that idles erratically. It does not effect the car as you are driving at normal speeds just when idling. The check engine light has also come on. The codes are bank 1 and 2 are running lean. I have replaced the fuel filter and the spark plugs are
|
| anti-freeze for 2001 | 05 Jun 2006 02:47 GMT | 1 |
new to the group & was hoping someone could help with a question. just bought a 2001 explorer sport & noticed in the owners manual it said to only use one type of anti-freeze, by ford of course, but, it also had other ford types but said not to use those. pretty confusing.....what
|
| Humming '96 EB 4x4 | 04 Jun 2006 19:16 GMT | 4 |
My '96 EB 4x4 emits a loud humming sound from the front end that is loudest between 40 and 50 mph. The sound goes away when I steer to the right, but is unaffected when I steer left, so I figured that it must be the bearing and hub assembly on the right side of the truck ...
|
| Windows wont roll down | 04 Jun 2006 01:59 GMT | 1 |
I'm having a problem with the power windows not going down on my 92 ford explorer. It wants to move but cant for some reason???
|
| '97 compressor not running | 03 Jun 2006 20:38 GMT | 1 |
I can turn the compressor, but it won't "engage." The fanbelt part turns. the inner part turns by hand. Is there a thermal switch that kicks on the clutch? I've looked for a fuse, but no luck. Is there a "short" that would force
|