I have seen Alot of FORD Explorer Radio this and that which are all incorrect
if you have a factory amp. The color of wires dont work at all if its coming
from the Amp. I need to know where the AMP is located and wiring from
speakers to the amp and etc. If you are going to tell me ...

Where is the factory stereo amp hidden in the 1993 Explorer?
Equally important, how does one get to it?
-Kevin

Display comletely off.  No lights at all.
Tried the fix of resoldering the terminations on the described board
and had great success!  Plugged in and the lights came on.  As
mentioned in the string there are three high power resistors on top of

I want to purchase an aftermarket LED 3rd Stop Lamp (High Mount) for my
2002 Explorer. There are none out there shown for the 02-06 Explorers, but
there are several for 03-06 Ford Expedition. As far as I can tell from the
pictures I've seen and looking at the lamp on several ...

I have 1995 XLT, manual transmission, 130,000 miles.  My son took it to
work and everything was fine.  When he went to leave work, it would not
start.  It cranks fine, but will not start.  I suspected it was a fuel
supply problem because I did not hear the fuel pump when I turned ...

Questions:
(1) I do not have a puddle when I stop my vehicle from the A.C.  Is
the Navigator different than other vehivles ?
(2) Where is the condensation hose?  I beleive it may be kinked ?

my 1993 ford explorer has a tranny problem? or i think it does any way. the
problem is i am driving at a 45 - 55 mph speed and it goes out of gear into a
neutral almost. i have to put the shifter into neutral gear before i put it
back into drive. it does go back into drive and then ...

my truck was running fine yesterday i have a 95 4wd explorer i just put
transmission fluid in it and today when i got to my destination the fluid was
gone atleast thats what the dipstick said it had no fluids so i bought some
more and poured in and it ran clean out right after i ...

I just replaced the rack in my 1995 EB Ford Explorer.  I filled th
steering reservoir and started the engine.  The car is still up on jac
stands.  With a helper slowly turning the wheel I kept filling.  At thi
point it took less than a quart.

Here's a pic from my 98 Ford Explorer:
http://tinyurl.com/5mfsg6
Is it a stablizer link? I had a break job done recently and they said
I needed to do something with my stabilizer links. I cannot remember

I come across a problem , trying to pin point. Recently when truck is not
moving but engine  running , turning the steering wheels ether left or right
, I get very noticeable vibration on steering wheel. Check oil , it was
fine. If truck is loaded with something heaver, by ...

I am trying to replace the front wheel bearing assemblies on my 02
Ford Explorer XLT V8. I cannot get at the three 15mm bolts that hold
the assembly onto the back spindle housing. Does anyone know if these
require a special tool?  I've tried all sorts of box wrenches. Sockets