How can I disable the ABS brakes on my EB Falcon?
I'm sick to death of hitting small bumps in the road (or twigs) under
braking and almost rolling on into the car in front. It's only a matter of
time before I roll into another car.

Hey does any way know if a V6 toyota or holden engine and gear box  would
fit into my escort  just a thought
Peter

If you wanted to put bigger brakes on an XD (FC LTD) without the expense of
Brembo calipers, would it be possible to fit F100 or similar Ford light
truck calipers?
Anyone been down this path?

Hey, does anyone know any of the following:
1) How to tell which of the 4 power output specs is under the bonnet? (157 /
164 / 168 / 172 KW)
2) If a 157 KW, what mods can take it to 164KW

ive been toying with the idea of getting a escort for my next car, they can
be had for sfa with work done to them already in most cases, i would go the
6cyl cortinas but id prefer something that can handle :) all thoughts are
appreciated...what are the jap equivalents of the era ...

Can anyone  advise when the new model falcon will hit the showrooms and how
big the changes might be?

Considering some Sime 215/60 15 tires. Anyone got any comments?
Alternative is Firestone TZ108. Both cheapies - $110 / $120
Bear in mind, I don't plan to race on them!!!
Thanks

Bloody Low Beam not working.
Power comes from 30amp Circuit Breaker that I can't locate, but it must be
OK because it also feeds High Beam that works.
Checked (swapped) the Low Beam relay but still no success.

Always was and always will be. f.cked up Ambrose's race today. Why do Ford
always pick up the Holden rejects?

Does any one know where i can get my hands on audio wiring diagrams for
daewoos?

Hi Group,
Can anyone suggest a newsgroup or some such where I could put up a couple of
Ford parts I have for sale?
Namely an XF digital dash, and a brand new XC rear bumper.

I read a while back in "Streetmachine" that there are modern ratio steering
system's that you can buy, I forget who made them.
And that's my problem, I can't find out who makes them, and they slot into
old falcons...I'm looking for one, for my xe falcon.

Hey all,
Just wondering if there's any alternatives around for the standard XF/ZL/FE
EFI engine head.  I've been quoted $450 for a complete re-build head, and
probably more to have my own re-built (It's a Gem engine using 1st oversize

Anyone know the trick to remove the door pillar trim,(so that the seat belt
retention reel can be accessed)
Cant see any screw or anything
(EB)

is there any problems with them, engine or driveline wise????????