| Thread | Last Post | Replies |
|
| Brake Shudder EB11 | 30 Oct 2003 09:52 GMT | 13 |
Iam getting intermittent shudder thru the steering column when I apply the brakes. Its intermittent and doesnt always occur,but is really bad on a downhill application of the brakes.
|
| Engine Identification Number | 30 Oct 2003 02:07 GMT | 1 |
I have a 1961 Ford Falcon, the engine is not original (I think). It is a Ford 289 V8. Where on the block would I find the engine identification or serial number. Thanks,
|
| wiper circuitry... | 29 Oct 2003 05:04 GMT | 5 |
Ford XY, very original, 6 cyl, 250. I want the wipers to go every few seconds for when it just spots with rain... I have a later model ford electric windscreen washer bottle already so I don't mind another step towards modernity ... Anyone know of a kit or a simple ciruit I can use
|
| Problems with my BA XT V8 manual sedan | 29 Oct 2003 04:14 GMT | 7 |
It's been six months since I received my car. It is as above and also has sports suspension, LSD and 17" wheel & tyre combo. And altough generally better than my AU Forte, it has displayed more problems in the first 6 months than the AU had in four years. Problems noted as follows:
|
| AUII Falcon Forte leaking automatic transmission | 28 Oct 2003 07:47 GMT | 1 |
I am concerned about what looks like an oil leak from the top-rear of the automatic transmission on my 2001 AUII Falcon. Car has done 80,000km and still under warranty. Ford have suggested the transmission oil has either overheated or lost
|
| super cheap auto brake pads. | 27 Oct 2003 23:25 GMT | 4 |
Hey has anyone had any experience with super cheap auto's brake pads? I beleive they are ferodo brand. do they last and are they good at stopping?
|
| Bathurst 2003 | 27 Oct 2003 02:17 GMT | 23 |
We lost again yesterday - f.ck it sucks being a Ford fan........... FF
|
| workshop manual doesnt say how to remove brake disc. | 24 Oct 2003 01:57 GMT | 3 |
Hi the workshop manual I have here does not say how to remove the rear brake discs. ive removed the caliper (not much help from the manual here either), and removed the big screw in the middle of the disc it said to remove, but
|
| get paid to read e-mails!! | 23 Oct 2003 11:13 GMT | 2 |
it works i'm getting paid for it so why cant you????? i've made $$$ give it a try
|
| Warranty Job | 22 Oct 2003 02:00 GMT | 1 |
Well, after 6018km my car has "finally" needed to go in to get its first warranty job. This is the XR6 not the Mazda2 of course... The throttle switch and position sensor need replacement. Had it done
|
| would normal engine oil in a LPG car cause it to blow smoke? | 21 Oct 2003 11:48 GMT | 3 |
would normal engine oil in a LPG car cause it to blow smoke? im thinking the previous owner of my car may have put the wrong oil in. you need LPG oil for a car running on LPG. how long will a car be able to run with bad value guides/seals?
|
| Door panels on escort | 21 Oct 2003 11:45 GMT | 1 |
Hi; Is there a knack to bend masonite to the curves on the door panels on a escort. The old is cracked and rotten, but it is masonite that is curved and slides in under the triangular window and also holds the window in
|
| V6 in a escort ?? | 20 Oct 2003 09:23 GMT | 2 |
Just a question, is it possible to fit a V6 holden or toyota engine into a 1300 4 door escort, or the old capri V6 tho is very hard to track one down. Peter
|
| Re Escort radiator swap over | 19 Oct 2003 02:44 GMT | 4 |
Hi folks; My last question, was some what incorrect. Does any one know, what type of radiator can be fitted into a 1976 1300 automatic escort. Getting hold of the proper one, seems to be a little difficult. So i thought
|
| are EA sedan diffs same as EA wagon diffs? | 17 Oct 2003 21:06 GMT | 5 |
are EA sedan diffs same as EA wagon diffs? -Robbie
|