| Thread | Last Post | Replies |
|
| AU stereo | 27 Dec 2003 13:16 GMT | 1 |
Can anybody tell us how to remove the stereo from an AU falcon?
|
| Happy xmas | 24 Dec 2003 19:54 GMT | 3 |
Hi folks; From my family and me wish all you ford owners a merry xmas and equally good new year. The escort is back on the road and firing on all 4 pots. Thanx for all help and new ideas.
|
| BA Falcon XR6 Premium sound TFT Mod | 24 Dec 2003 08:37 GMT | 3 |
Has anyone been successful in moding the tft screen in the BA XR6 ? What I would like to know is; - Pinouts for the inputs to the tft, - Where to source the plug for the inputs, looks like a Camry plug maybe
|
| Wheeltrims Falcon AUII | 23 Dec 2003 19:30 GMT | 1 |
Just recently bought two new tyres for the front of Falcon and within two weeks have had two flat tyres on front right-hand side. It seems that while driving the wheeltrims rotate anti-clockwise pulling back on the wheel valve shearing it off and causing leakage. The trims fit ...
|
| XE 351 thick wall block? | 23 Dec 2003 15:11 GMT | 3 |
I've seen people advertise 351 Clevo's stating it has an XE thick-wall block? Can anyone elaborate on what this means? Thanks in advance,
|
| EF Falcon Air Con | 22 Dec 2003 00:50 GMT | 6 |
I recently had my Air Con Re-gassed and then two days later it started blowing hot air again. I took it back and they told me my Evaporator had gone. Cheapest quote I have got so far (Melbourne) is $650.00. I am thinking of giving it a go myself but I'm not real sure as I have never ...
|
| Stereo Wiring | 21 Dec 2003 03:59 GMT | 3 |
Can anyone help me with getting a diagram of the wiring for the stereo in a 95 Futura. has any one got the diagram for the loom? Thanks
|
| Make 351c more economical? | 19 Dec 2003 22:30 GMT | 34 |
As our Fed Govt is going to jack the price of LPG to near petrol parity, it will have a dramatic effect on those who want to run an old tech V8. The Clevos are gas-guzzlers and mine, around town gets only 8mpg on LPG, it would be about 10 or so on petrol.
|
| EF falcon sedan fuel pump assembly removal | 17 Dec 2003 12:34 GMT | 4 |
Can anyone tell us how to remove the large "finned" plastic ring? Can't tell if it should screw off, bayonet, or clip off, don't want to break anything. Any help and tips re: changing pump appreciated.
|
| Spoiler from a AU | 17 Dec 2003 07:40 GMT | 3 |
Hi folks; A friend of mine backed into a tree and cracked his rear spolier, so he bought a new one. The gave me his old one. It has a slight crack 6 inches long that can easily be repaired. Any offers for it ?? I
|
| desperate for 5 speed to suit v8 clevland | 15 Dec 2003 21:10 GMT | 5 |
can anyone help as i have a 351 cleveland and the singlerail 4 speed keeps on dying. need a good 5 speed such as a T5, T55, T10, super T10???
|
| draining fuel from fuel pump at tank. | 15 Dec 2003 00:02 GMT | 3 |
on the side of my fuel tank there is a circular device that has an electrical cable going to it and what looks like a fuel hose going from it. If I disconnect this fuel hose from the joint up ahead (just behind the wheel) and point the fuel hose into a bucket, then crank the ...
|
| EFi 5l v8 headers | 14 Dec 2003 04:03 GMT | 3 |
Is it possible to remove the oem exhaust header on the drivers side without messing with the steering shaft ?
|
| grinding valves in Escort 1300 | 11 Dec 2003 21:18 GMT | 2 |
It says in the manual that the valves dont need to be ground in, but i feel they do. Any ideas on this subject ?? Also is it the best to push pistons thru the top of block or out thru the bottom ?? Thanx folks Peter
|
| EA Falcon Timing cover | 08 Dec 2003 12:12 GMT | 3 |
Has anybody taken a Timing cover off a 3.9 EA Falcon? We are having a few troubles Thanks Greg
|