| Thread | Last Post | Replies |
|
| ethanol in '90 EA multi point | 31 Jul 2004 11:21 GMT | 7 |
i have a 1990 EA falcon with multi-point injection, and was wondering if anyone new wether it was safe to run it on that E10 ethanol blend, i have been told that the most it will do is make the engine run a bit hotterbut that is all. however annother sorce told me that it could ...
|
| door not locking | 30 Jul 2004 17:56 GMT | 1 |
Hi, I have an Ef falcon. I have an aftermarket alarm with remote entry. It is hooked into the central locking, but I don't think it is related. Basically, when I lock the doors, the driver's door isn't actually locked. The two buttons go down on the doors and the other
|
| hunting idle | 28 Jul 2004 23:20 GMT | 1 |
What is this caused by? only happens when backing off the throttle. injected 5L EEC V
|
| AU XR6 Diff noise | 28 Jul 2004 02:03 GMT | 5 |
HI Guys... Have an AU1 XR6 VCT Manual, with 60,000Km on the clock. Bought recently. At low revs/speed i.e. pulling out of a parking place/reversing with the clutch not fully engaged, there is an intermittent knock/clunk from the
|
| BA workshop manual | 25 Jul 2004 21:42 GMT | 6 |
When I bought my F150 back in 1989 I was able to buy a Ford workshop manual for, from memory, about $75. When I recently bought a RTV (my F150 is still going strong but it getting a bit old for long trips) I was told no
|
| Wanting to buy | 25 Jul 2004 14:44 GMT | 2 |
Hi guys, I am doing a auto to manual conversion in my EF. I need some parts obviously. I live in Maryborough, Qld but figure I will have to drive to Brissy to get them. Does anyone know of a wrecker in Brissy who would be good to go through? I am probably gonna try and find a
|
| New Wiring harness for XB Hardtop | 24 Jul 2004 05:31 GMT | 1 |
Greetings all, Does anyone know of a supplier of new wiring looms for a Falcon XB hardtop?? Im starting to have all sorts of electrical problems!!!!!!! Cheers
|
| Brake light switch | 23 Jul 2004 10:39 GMT | 8 |
How difficult is it to replace a brake light switch on an EF falcon. some say it is an easy job that takes 5 minutes. I tried to replace mine for over half an hour and even then still isn't fixed.
|
| headphone socket fitment | 19 Jul 2004 08:19 GMT | 2 |
I have had my RTV for over six months and have not been able to have a headphone socket fitted in Canberra. The people I have spoken to simply look blank and cannot help. Has anyone attempted this? Any suggestions?
|
| Auto to Manual Swap no crap | 17 Jul 2004 10:41 GMT | 12 |
Allright guys, let's cut the crap. I relly need to know a bit about this auto to manual swap, but without people guessing. I have read other posts on here with people saying "I think you need to do this.", "I think you need to do that.".
|
| Re Speedo picture | 07 Jul 2004 09:15 GMT | 3 |
Hi folks; Any you young ( lol ) folks recall seeing a picture in a ,agazine many years ago of a GTHO speedo clocking a great speed when 2 journo's were returning the car back to Melbourne and were running late to
|
| XY and XW question | 07 Jul 2004 02:56 GMT | 1 |
Just wanted to know if XY and XW have identical bonnets and boot lids Thankz
|
| upgrade to AU11 | 03 Jul 2004 14:41 GMT | 4 |
As my EB2 is suffering from a number of probs and high k's i am looking at upgrading to an AU2 or AU3. has anyone got any tips hints or things to look out for. any info would be appreciated. thanks
|
| Head Gasket woes | 02 Jul 2004 11:12 GMT | 14 |
Gotta love them Falcon head gaskets (I know Noddy, poor maintenance not design fault :-)). It seems my ED (6cyl auto, dual fuel) has blown a head gasket. I noticed it was losing coolant at a rate of about 1l/week a few weeks ago, but
|