| Thread | Last Post | Replies |
|
| Windows Jamming EF | 22 Aug 2004 07:47 GMT | 7 |
Sirs, I own an EF wagon with manual windows that jam when winding up. I tried some silicon grease on one but no avail any comments please , before the kids bust the mechanism...
|
| what the ell is a "falcon?" | 20 Aug 2004 06:58 GMT | 26 |
X-No-Archie:yes OK ,I've been reading this group a bit because I used to own a 1965 ford falcon v-8.At the risk of sounding like a troll, I can't figure out what this thing is you are talking about.Is there a comparable vehicle in the US with another
|
| Ignition Lock Removal | 18 Aug 2004 01:54 GMT | 1 |
I have an EF with an intermittant Accessories contact within the lock housing. How do I remove the assembly short of using an angle grinder to create a screw driver slot ? How much is a new assembly? Thanks in advance
|
| mods.dk | 18 Aug 2004 00:51 GMT | 1 |
I'm having problems getting on to http://www.mods.dk It says I'm not authorised to access the page. Anybody else copping similar problems? 73, Alek
|
| XF no high beam | 17 Aug 2004 11:57 GMT | 6 |
The high beam has stopped working (low beam ok) We took the bulbs out and hit them with 12v - both ok. mmm. What now? Could it be the relay? Where would the relay be for this? Thanks
|
| wrecking XC V8 panelvan | 13 Aug 2004 07:49 GMT | 9 |
many parts to go including a ZH fairlane front end in good condition, reply here if ur after any parts --- Outgoing mail is certified Virus Free.
|
| El tranny problem, | 08 Aug 2004 12:25 GMT | 6 |
All jokes a side, I have a problem with my El auto trans, after about 10-15 minutes of driving the tranny seems to lock into what I think is 3rd gear, when I stop and try and take off again the tranny feels like its slipping and won't
|
| Help | 07 Aug 2004 05:09 GMT | 6 |
Hi folks; Any of you local guys ( Maryborough Qld ) like to visit my house and show me how to adjust the tappets on my 1300 escort ?? would be much appreciated.
|
| EA falcon bushes | 06 Aug 2004 07:58 GMT | 6 |
just got my 1990 EA falcon serviced and asked the mechanic to give me a heads up for what will be required for rego.... new wiper blades, engine wash, front wheel bearing covers, front sway bar bushes, rear control arm bushes. He says to replace the bushes on the control arm
|
| BA Falcon xr6 Questions- want to buy | 06 Aug 2004 02:35 GMT | 2 |
Im looking at a BA Falcon, I noticed on the ford site that the XR6 (non turbo) has the same power as the base model XR6, Is this right? For the extra few grand probably better to go for the xr6......right? Can you get a heavy duty tow pack for the ba?
|
| Hey Dirko! | 04 Aug 2004 22:55 GMT | 1 |
Hey man, this forum seems to be underused. Hmmm, maybe it's just crap!
|