| Thread | Last Post | Replies |
|
| 2003 Focus stalls intermittently with warm engine | 16 Mar 2007 15:00 GMT | 1 |
My 2003 Focus wagon behaves stupidly sometimes. Here is what it does: I might drive it a bit and then stop somewhere to go to the store or something, and then when I come out and try to start her, she stalls immedieately, and then only when I hit the gas will she stay started,
|
| Ford Focus Dead Battery, again | 15 Mar 2007 20:35 GMT | 12 |
In November 2006 I left my 2003 Focus for four weeks. When I returned, the battery appeared to be flat. I had the battery checked, and it appeared to be OK, but I bought a new one as a precaution. I am now in Spain for eight weeks, and a neighbour has been starting my
|
| Rattling - tailgate end? | 15 Mar 2007 00:10 GMT | 3 |
My 53 plate (UK) Mk2 Focus has a really annoying rattle at the rear which is driving me crazy. It appears to be worse at startup when travelling at relatively low speeds and sounds like the parcel shelf loose (it isn't as I tried that) or one of the rear seats not secured ...
|
| Dashboard Dials | 13 Mar 2007 18:45 GMT | 1 |
I wonder if anyone can help. I have a 2003 focus and i am having problems with the dash dials. The engine warning light will come on and then all the dash needle’s will go to their parked postion (except the fuel gauge). then the light will go out anf the needle’s will go
|
| Waterpump / Overheating. | 13 Mar 2007 10:24 GMT | 1 |
My water pump on my 1.6 estate (2000) went on Sunday, unfortunately with my wife driving. She reckoned the temp didnt go up much and it faile din a car park, dumping the coolant out througfh the pum bearing housing.
|
| Oil in cooling system?? | 12 Mar 2007 10:14 GMT | 1 |
2001 turbodiesel Ghia 66,000 miles collected after full service and MOT. Passed OK but then given the bad news! There is oil in the cooling system water which is coming from the oil
|
| Mk 2 Focus width? | 11 Mar 2007 21:30 GMT | 1 |
Anyone know what the width of a Mk 2 (UK) Focus is without wing mirrors? Can't find it - no handbook. Cheers Paul
|
| 2000 zetec rear wheel bearing torque | 05 Mar 2007 18:43 GMT | 1 |
Can anyone tell me the correct torque setting for the rear wheel bearings on a 2000 1.8 Zetec with rear drums please. Many thanks - AJ
|
| Brake hardware | 01 Mar 2007 20:44 GMT | 2 |
Afternoon all, Just need to know what size allen wrench is needed to remove the two caliper bolts on a 2001 SE wagon. It is a shade bigger then the 1/4" I have.
|