| Thread | Last Post | Replies |
|
| Identifying a big nut | 24 Mar 2009 18:05 GMT | 4 |
I have just found this big brass nut http://www.stephen.hull.btinternet.co.uk/example/photo.jpg dangling down towards the front of my engine, anyone know what it is? Ford Focus 2.0 Zetec, 2001
|
| Ford Focus | 20 Mar 2009 23:57 GMT | 4 |
Just purchased a 2008 Focus 4 door loaded. 20,000 miles (Is that a lot for a one year old car ?) for, $9,995.00 plus all the xtra taxes and charges. Also got the Easy Care Service plan good to 100,000 miles or 60 months. Int rate 6.9% payments 200 a month...Can someone tell me
|
| Tailgate not opening 05 Ford Focus. | 20 Mar 2009 18:01 GMT | 3 |
Strange problem today with the car. The boot won't open. You press the microswitch near the rear number plate, you can hear a dull 'clicking' sound - but the tailgate won't release. Is it common? What could've caused this? Is this a dealer job?
|
| Low mpg - any ideas on how to improve? | 17 Mar 2009 15:37 GMT | 14 |
Just bought a 2006 Ford Focus Ghia Estate with Auto and Cruise control, 2 litre unleaded petrol engine. Mileage 27,900 miles. Manual gives mpg as 42 mpg average of urban and non-urban. I only average 32 mpg when just I am driving and no contents in the car.
|
| Speedo problem! | 17 Mar 2009 15:32 GMT | 2 |
Hi my focus sometimes has a problem with the speedo, as the needed fails to show the speed, and just stays on zero, but it does work most of the time, I have no idea why this is happening, can anyone help? Thanks.
|
| Focus seating posiition | 17 Mar 2009 12:43 GMT | 1 |
I have just bought a 2008 Focus Zetec Automstic and I find the driver's seat is lower than I would like. The adjustment for the seat cushion raises the seat but it also moves the cushion forward, which results in an uncomfortable seating position.
|
| 2000 Focus OBDII port | 04 Mar 2009 06:16 GMT | 2 |
I know it's in the car somewhere because the emissions testers found it. Short of standing on my head, I've looked around under the dash and haven't found it. I read someplace where it was inside a little panel with a cover but all I've seen in there so far are fuses (I even checked ...
|
| Speaking of Timing Belts | 03 Mar 2009 12:44 GMT | 2 |
Speaking of timing (cam) belts and chains, does anyone know which, if any, of the Focus engines are interference and which are non-interference? In an interference engine, the pistons and valves share some of the same
|