| Thread | Last Post | Replies |
|
| Tranny Problem | 11 Aug 2003 22:15 GMT | 4 |
89 5.0 GT Vert with AOD. Stock everything, 2.73 gears 33K miles Just got the vert back from the body shop. Had to replace the hood, dr. side front fender and top from when the tree branch fell on it.
|
| 87 LX Value | 11 Aug 2003 17:45 GMT | 4 |
Hi, a family friend called to tell me their brother is selling his 87 LX 5.0 hatchback, 105K, mint condition. He's looking for $4500. Now, I'm looking for a 67, so I'm not sure why he called me on this, but I figured I'd check it out anyway.
|
| Shell oil | 11 Aug 2003 17:38 GMT | 9 |
Is it ok to put into your engine? voice from the past
|
| Ping .......BillS | 11 Aug 2003 12:57 GMT | 1 |
Bill, After changing the harness back to the cougar harness there was no change. I have now install a new throttle body but that didn't help either. It simply is running too rich. I checked the error codes and found that
|
| $9500 too low for my Cobra ? | 11 Aug 2003 06:03 GMT | 11 |
as you may have read I am selling my 93 cobra.. teal/leather/moon roof 4660 of 4993.. interior is perfect.. exterior has a door ding, one hail ding and some missing paint on front lower dam about 2" by 1/2" flake... 50,300 miles. It needs cat back exhaust as my muffs and pipes ...
|
| blower question | 11 Aug 2003 05:22 GMT | 1 |
I have a 96 gt vert with a 110,000 miles and was wondering if a pro-charger would be too much for the motor.Engine runs fine now doesnt seem to wore out. Thanks for any help. Pat
|
| Cobra saga continues... New Tire opinions? | 11 Aug 2003 01:07 GMT | 4 |
well thank you all for your input. I really appreciate your wisdom. I somewhat figured he was pulling my chain.. and would only dance for him so far. I had the exhaust replaced today with a catback system slightly more open
|
| Can't Escape Ford | 11 Aug 2003 00:58 GMT | 9 |
After my wife referred to the '93 LX 5.0 as "crappy", I reminded her that her '99 Mystique wasn't getting any younger. It was time to think about trading it in. While I can go years without sitting in a new car, I want her to have a
|
| Anyone have any or all the old Ford Motorsport Catalogs? | 10 Aug 2003 19:26 GMT | 5 |
I need info on the following valvesprings. M-6500-A301. The website or any other website lists any specs for them at all. I believe these have been discontinued. I need any and ALL info on these valvesprings if anyone could dig through their old catalogs and get that for me..... ...
|
| Where oh where is the horn relay on 84 Mustang | 10 Aug 2003 18:55 GMT | 3 |
I (my kid really) has an 84 L (not the lx, the 'l') with the 4 cyl and the horn does not work. I think it is the relay but be darned if I can find the thing. I got desparate and went to Pep boys and bought one hoping that they would sell me the right one and then knowing what
|
| ricer abusing his car | 10 Aug 2003 15:18 GMT | 4 |
I'm driving home on some country roads in me new 03 GT. A pickup turns off a side street into my lane shortly followed by a ricer (fart can and all), who screeches off the turn and blowing some carbon out the exhaust from hard acceleration. I'm several hundred feet back. He pulls up ...
|
| 1966 factory Ford Performance catalog posted online | 10 Aug 2003 15:12 GMT | 2 |
Hey all...the newest installment of the factory Ford High-Performance literature series has been posted to alt.binaries.pictures.auto. This is a 40-page booklet showing the hi-po equipment available
|
| Recaro Seats | 10 Aug 2003 11:59 GMT | 1 |
I'm restoring a 79 Pace Car and I need to find a source for the fabric on the recaro seats ,any help would be great.
|
| What could these noises be? | 10 Aug 2003 04:41 GMT | 8 |
After installing 18" wheels on my '96, I have noticed a weird noise and feeling in the rear. It's hard to explain, but it sounds sort of like something is grinding...or skipping...hopping? It doesn't matter how hard I stomp on the gas either. Of
|
| Want to get rid of side scoops on '02 GT | 10 Aug 2003 02:20 GMT | 1 |
Has anyone here done or heard of anyone else doing a sort of swap/delete of the side scoops of a '00-'03 GT? I was thinking along the lines of putting on the scoops from a V6...to me they look much smoother and less like fiberglass tumors. Also...anyone know the
|