Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Mustang / August 2003

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
WTB 70 Mustang drivers door10 Aug 2003 00:18 GMT1
Anyone have a good 70 Mustang left door for sale?
Thanks
Jack
Ford stalls, wont idle09 Aug 2003 22:51 GMT2
Howdy:
I have a 85 LTD CV, that stalls and wont idle.  Its TBI's
vacuum-activated, throttle positioner's plunger, can be extended about
1/8" with a MityVac.  Is this 1/8" a correct setting?  Or, should it
2003 GT convertible as "family car"?09 Aug 2003 21:48 GMT13
i am considering to buy a brandnew stang convertible as a "everyday's
car". I am 5ft6" - will my kids (5yr. and 9yr.)fit in the back?
we currently run a 2000 sebring convertible which is to be replace by
the stang (what a difference i know!).
odometer problem fixed!09 Aug 2003 21:07 GMT1
A nice gentleman in TX sold me a 94/95 v6 cluster with a mileage very
close to mine (101K vs 108K) which I just installed. About 30 mins work
which included swapping the bezel and clear front from the old to the
new gauge pod as mine has an aluminum inlay and the new pod's clear
ABS question09 Aug 2003 16:41 GMT2
My ABS light goes on and off intermitting. I caught the light pop on
traveling on a rough road. Could it be a loose sensor wire? I hate to bring
it in for service for a wire and they stick me with sensor replacements. ABS
could be costly . When the light is on the ABS does not work?
Installing torque box in a 67?09 Aug 2003 14:50 GMT2
It's a puzzle with no answer.. You can't fit it in from the bottom,
because the top of the torque box has to go on top of the frame rail,
and the top of the torque box is bent at a 90degree angle.. And you
can't fit it in from the top, because the bottom is much wider as to go
3.73 Gear & Subframe Connectors09 Aug 2003 13:14 GMT3
Hi I am new to this group  :)
I know these questions have been asked hundreds of times.
Question 1
I have a 94 GT
Stearing noise question09 Aug 2003 11:59 GMT3
I have a 95' Mustang GT Convertable and lately when I turn right it
makes a creaking noise. It is only when I turn right though left is
completely silent. The creak happens at the same stearing location
each time also. For example, I turn from 1 oclock to 2 oclock you hear
clutch wear09 Aug 2003 08:19 GMT3
The clutch "feel" my stock 1996 32k mile Cobra seems to have changed.  It
seems like it is engaging higher up in the pedal travel than it used to.  Is
this an indication of the clutch reaching the end of its life?  It seems to
drive ok and the RPMS don't rise abnormally when it is ...
Weather checked tires dangerous ? and  what are "blemished" tires ?09 Aug 2003 06:12 GMT2
the buyer came over and looked at my 93 cobra..  he said my bfgoodrich comp
T/As are weather checked... they have tiny cracks where the tread meets the
sidewall. They have 12k miles on them and are 3 years old.
Are weather checked Z rated tires dangerous ?    I bought them at ...
'65 Under Dash Wiring Harness09 Aug 2003 04:11 GMT2
I'm looking for an underdash wiring harness. Anyone know where I might get
one of these or have one laying around that they want to get rid of? If so
please let me know.
Thanks,
Amsoil?09 Aug 2003 01:38 GMT9
Any one here use their products? I am trying to get the Mobil 1 line for my
garage and having a hard time with the Exon corporate red tape...It would be
easier with Amsoil. I like the choices but never used their products.
Any comments?
Brembo 13" 4-pot calipers > Whats a good price?08 Aug 2003 20:25 GMT1
For brand new 13" calipers but "with scratches in the powdercoat". Anybody
know what the MOST i should be paying for these is? Also, they come JUST
calipers, so I'd have to get the brackets, rotors, lines, and pads all
separately.
Is the new Nissan 350Z supposed to be fast?08 Aug 2003 17:05 GMT9
I met up with one on the highway today.  When he went by me and I noticed
his plate, XLR82XS.  (I guess that means accelerate to excess...)  Okay,
whatever....
Well, this car has won a lot of good reviews with words like "razor
OT: Totalled Honda value unbelievable!08 Aug 2003 11:44 GMT6
Our insurance company finally got around to putting a value on the innocent
Honda our drunken neighbor totalled for us three weeks ago. Before I give it
away, I'd like to hear what some of you think it's worth. It's a '96 V6, has
everything but leather. Some interior wear, could use ...
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 July, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.