I am looking to by a 1998 - 2003 Mustang, but I would like to here from
other people who have them...
www.B.Myers@verizon.net

Other than a leak, is there ANY good reason to by-pass the Heater Core ??
My "new" 89s is by-passed by the previous owner. Just wondering why (if
there wasn't a leak). FYI, the car was recently repossessed out of Florida.
ERIC

 Putting brakes on my '01 GT tomorrow and have a question:  Can i support
the entire car using 4 jack stands or should I just do the fronts first, put
her down on the ground and then do the rears?  I've seen them on 4 stands
plenty of times, but just read the warning on my jack ...

Can someone tell me how to adjust the clutch on a 89 5.0 ??
I don't see any adjustment mechanisms..... Am I overlooking something ??
The clutch is engaging to close to the floor for my taste.
Thanks,

Any one heard of the power elbow ?
It looks like a lower intake from a carb with a 90 degree elbow pipe  to
mate it to the  TB.
I like it becuase it looks very clean.  Real small upper.   I have a 86 GT

I was wondering if there were any last minute tips for the installation from
anyone who has experience with them. Of course it is supposed to rain all
weekend here in New Jersey so, I will not be able to put them in until next
week. Thanks for the help in advance.

Where's the cheapest, most reliable place to get a Steeda Tri-Ax shifter?
Cheapest I can find is 179 and I can't even remember where I saw that at  :)

I've had the car for 2 months, got to call tomorrow for an appt. Drivers
side window doesn't work, its stuck in the down position. Push the up button
and nothing, when I push down i get a faint 'click'. First time they
replaced the steering wheel due to it peeling like an onion. ...

Need some advice everyone.  Gonna build a PC from scratch this time and need
some advice as to component selection. I have 2 PC's already to use as a
foundation but do not know which, if either to use.  One is my current Dell
regular 4300 series tower and the other is an older ...

I have a K&N filter on my stang now.  How much (if any) horsepower benefit
would I receive by investing $100 in a cold air intake??
Brad
03 GT

I am looking at a 99 Ranger which has power windows, power locks, power
windows the truck is a king cab with four doors, and off road towing
package. It's a nice truck, high mileage but with a 4.0 and 5 speed auto
trans, including 16 inch wheels instead of the standard 15"  In my ...

A DOHC 4.6 plus two extra cylinders equals 351 cubes (It's not related
to the current 6.8 liter V10).  Slip it under the hood of a current
Mustang and you have a new Boss 351.  Except this time, 351 cubes make
430 horsepower and 405 foot pounds of torque _at the wheels_, even

After visiting some dealerships (small and large) I was unable to negotiate
a good deal for me. I know I had them pretty low, I hoped there would be a
little more wiggle room.
Anyhow, I've heard buying a low miles used car can save serious cash. With

I came across(at a junkyard)an older,Im guessing,5.0 upper intake
manifold.Im never seen one like this one.I was wondering if someone here
could give me little info on it.The decription goes like this:basic 5.0
manifold except the vauum ports appear to be on the top-side and thiere

i just picked up a new 302 engine and a new turbo my question is i've seen a
carberated 302 fitted with a paxton supercharger and the tube coming up to a
part that bolts on top of the carb i need to know what this part is called
and ware i can get one so i can turbo my 66 mustang ...